Product category:
Probes and sensors
News Release from: Power Electronic Measurements | Subject: 3ph RCTi ac current transducer
Edited by the Manufacturingtalk Editorial
Team on 31 May 2006
AC current transducer equipment
The range of RCTi ac current transducer equipment produced by Power Electronic Measurements has now been extended to include a 3ph version.
The range of RCTi ac current transducer equipment produced by Power Electronic Measurements has now been extended to include a 3ph version In common with their other recently introduced single phase products, the RCTi-3ph is an industrially specified unit, designed for permanent installation, and suitable for use with oscilloscopes, data acquisition cards, power analysers and in power quality applications
This article was originally published on Manufacturingtalk on 2 Oct 2008 at 8.00am (UK)
Related stories
PEM introduces low frequency measurement probe
An LFR AC probe with low frequency performance has been introduced by Power Electronic Measurements (PEM).
Datalogic unveils handheld linear imager
Datalogic Scanning has launched the PowerScan PD7100 handheld industrial linear imager, a solution for users who need a rugged and durable handheld scanner.
SMAC's XYZ measurement devices challenge CMMs
A simple inspection fixture and a number of SMAC XYZ linear motor-based measuring units integrated into a production line or next to a machine tool can be faster than a CMM measurement process.
The flexible, clip around coil sensors are based upon Rogowski technology and can be easily retro-fitted.
Each coil is thin and lightweight, with three standard lengths which can be specified independent of measured current (from 500A to 50kA).
All coils are connected to a small single enclosure electronic integrator, which can be DIN rail as well as panel mounted.
A single isolated power supply (12 or 24V as standard, others including 48 and 110Vd/c also available) minimises cabling, helping to ensure a low cost per channel.
The unit can also be specified with BNC plug, detachable coil-cables for easy cabinet and control panel installation.
Other features shared by both the 3ph and single ph units are non-intrusive operation, with no power drawn by the coils from a circuit under test.
There is a predictable low phase shift with power frequencies of 50/60Hz and above, with wide-band width 0.6Hz to 800KHz for measurement of sub and higher frequency harmonics and complex waveforms.
The RCTi-3ph is an ideal replacement for medium/large current CT's (current transformer), but unlike a CT it is intrinsically safe to use because there is no danger of open circuit secondaries, high current surges or magnetic saturation.
A reading accuracy of +/-1.0% is claimed with an output load of greater than 10kohm, within an operating temperature range of -5 deg C to +65C.
The product is CE marked and complies with EN61010-2001, EMC EN61326.
The product can also be customised for coil/cable lengths, current/output ratings, frequency responses and phase error requirements at different frequencies.
• Power Electronic Measurements: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
