Product category:
Drives, motors and power transmission, couplings, clutches
News Release from: Premotec | Subject: S38 gearbox
Edited by the Manufacturingtalk Editorial
Team on 26 June 2000
Increased dynamic torque from spur
gearbox
Premotec has introduced a new gearbox type, the S38, a 38mm diameter spur gearbox in 9 standard ratios from 6 to 900:1
Not content with expanding their motor range, Premotec has introduced a new gearbox type - the S38 A 38mm diameter spur gearbox in 9 standard ratios from 6 to 900:1, this compact but powerful unit presents a variety of benefits to the modern designer
This article was originally published on Manufacturingtalk on 28 May 2007 at 8.00am (UK)
Related stories
3D models of off-the-shelf telescopic slides
Telescopic ball bearing slide designer and manufacturer, Accuride International, has produced optimised 3D models of its 'off-the-shelf' products which can be downloaded via its website.
This well-established, almost industry-standard, gearbox shape has been upgraded internally using an improved tooth profile.
Backlash has been reduced from 2 to 1deg at no load.
The result is an increased dynamic torque rating of 700mNm, longer life and significantly lower noise.
To allow the capability of the S38 to be fully utilised, full compatibility is provided with three Premotec coreless motor types - the 22, 29 and 40mm units - together offering over 160 readily available motor/gearbox combinations.
The all-round performance of the new S38 and its economic design make it extremely useful as an integral part of motorised drive systems in a wide range of applications requiring precise movement.
Application examples are conveyor systems, medical/ laboratory analysis equipment, printers, ticket issuing machines, and various pump types.
• Premotec: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
