Product category:
CNC punching and profiling
News Release from: Press and Shear Machinery | Subject: Finn-Power C5 turret punch press
Edited by the Manufacturingtalk Editorial
Team on 17 August 2005
CNC punch press halves cycle times
Installation of a CNC turret punch press and programming software has halved pressworking cycle times at the factory of a railway (railroad) equipment maker.
Pressworking cycle times have been halved at sheet metalworking subcontractor, Coleman Manufacturing, near Burton-on-Trent, UK, following the installation in November 2004 of a Finn-Power C5 turret punch press and Jetcam programming software from Press and Shear Machinery Stainless steel, mild steel and aluminium in the thickness range two to five millimetres is processed mainly by Coleman, which also frequently cuts material up to 8 mm on two plasma machines
This article was originally published on Manufacturingtalk on 23 May 2001 at 8.00am (UK)
Related stories
Sheet metal punching FMS has two cells
Britain's leading ride-on garden machinery manufacturer, Countax, has installed a GBP1 million sheet metalworking cell in a purpose-built extension to its Oxfordshire factory.
Tube benders need little programming experience
Minimal programming experience is needed to operate the new PC-based 'IMS' control system fitted to the latest Italian-built hydraulic tube bending machines from Pedrazzoli.
In the past, if one broke down there was no back-up and a bottleneck would occur, as anything above 6mm could not be machined on the two older turret punch presses on site.
The ability of the hydraulically-actuated C5 to punch 8mm mild steel provides the required back-up and eliminates the need to run expensive night shifts, as backlogs no longer occur.
Said Coleman's general manager, Paul Neale, "The Finn-Power press has 30 tons (300kN) of punching force and capacity of 200kg on the table, which is moved around at up to 100m/min traversing speed".
Further reading
Faster automated bending of sheet metal components
An uprated version of Finn-Power's bending automation equipment offers greater speed of workpiece manipulation in front of the machine, assisted by a new design of manipulator for rotation.
Flexible sheet metalworking for generator maker
Two advanced sheet metalworking facilities are nearing completion at the Springvale and Monkstown factories of FG Wilson, featuring six Finn-Power Shear Genius turret punch press cells
Laser profiling machine offers linear motor speed
Believed to be the only laser profiling machine to use low-friction linear motors on axis drives, it is able to accelerate at 2G and position within +/-25 micron.
"The shortlisted competitor's machine we evaluated was rated at 20 tons (200kN) force, so we would have had to pay tens of thousands of pounds extra for the 30-ton version to allow us to punch 8mm mild steel".
"Moreover, the machine could handle a weight of only 100kg of material on the table." Thirty per cent of Coleman's work is for the rail industry, ranging from fabrications used in rolling stock to single-piece, formed sheet metal seating.
There has been a sharp upturn in demand for the latter, especially in stainless steel, and the hundreds of drainage holes or slots that need to be punched in each seat are time-consuming to produce.
Neale commented that high speed was a prerequisite when buying the new punch press, particularly in view of the frequent need to produce arrays of holes in seats over nearly the entire surface of 2000 x 1000mm or 2,500 x 1250 mm sheets.
He cited another product that requires similarly intensive hole punching, namely a mild steel mesh guard for an earthmoving equipment manufacturer.
Either of the older punch presses used to take 75 minutes to machine a sheet of these nested components, whereas the C5 has reduced the cycle to 34 minutes - a 55% time reduction.
Many jobs produced on the new machine show similar savings.
The 60-employee subcontract firm has seen a lot of work disappear to China in recent years, and even receives weekly e-mails from Chinese sheet metalworking subcontractors offering their services.
To rub salt in the wound, they send pictures of their facilities showing how modern and well equipped they are.
So in common with the majority of manufacturing industry in the West, Coleman has a fight on its hands to combat the threat from the Far East and other low-wage countries.
Investment in advanced CNC machine tools like the Finn-Power C5 is part of the solution to the problem.
"While many customers require large batches, we need to be flexible and able to supply smaller batches of, say, 30- or 40-off economically," continued Neale.
"We turn around such an order in two weeks, making it difficult for an overseas subcontractor to compete without air freighting the goods, which is prohibitively expensive when moving steel around the world." Another advantage of the new punch press is its ability to upform features on components and mark them as part of the cycle, avoiding separate operations.
This results in considerable production cost savings and although the upforming facility has yet to be used, it will allow Neale to be more flexible on price when the right jobs come along.
So too will the ability to hold up to 120 tools in the 20-station turret by using multi-tools.
Advice with component designs and reverse-engineering using Coleman's co-ordinate measuring machine are other areas where the firm scores over its foreign competitors.
Neale will continue to acquire modern CNC machinery to remain competitive in a modern subcontract environment.
The focus will be not only on general jobbing and fabrication but also on work in stainless steel and aluminium.
It is fortunate for Coleman that the rail industry is demanding more and more components in these materials, as stainless steel is maintenance-free and aluminium's lightness improves the energy efficiency of trains. Request a free brochure from Press and Shear Machinery ...
• Press and Shear Machinery: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
