Product category:
Fast prototyping equipment, pattern-making and services
News Release from: Protoform | Subject: Space Puzzle Molding - automotive moulds
Edited by the Manufacturingtalk Editorial
Team on 19 September 2006
SPM uses all injection mouldable
materials
The Space Puzzle Molding is used regularly in the prototyping and production of early-series components - in all grades of injection mouldable materials - for automotive and other industries.
The Space Puzzle Molding (SPM) technique, patented and operated by Bavarian based company protoform, is used regularly in the prototyping and production of early-series plastic components for the automotive and other industries All grades of injection molding materials can be processed
This article was originally published on Manufacturingtalk on 24 Aug 2005 at 8.00am (UK)
Related stories
Tooling system has no complex ejectors
Space Puzzle Molding differs from full production tooling by an absence of complex ejector systems resulting in faster time-to-market and and costs 50% less than automated tooling.
Injection moulding system halves tool costs
'Space Puzzle Molding' uses state of the art CAD/CAM technology to produce metal tooling at half the price for injection molding via CNC and 5-axis machining.
Inserts, outserts, co-injection and gas-assisted methods can also be accommodated appropriate to the designer's specification.
In this automotive application the unusual technical achievement made was the result of an idea introduced by protoform's technical staff when co-operating with designers from Mitsubishi.
Working to a brief from automotive component specialist Dr Schneider, the task was to find an economical solution to a composite application for a directional ventilator molding destined for one of the Smart range of vehicles.
Further reading
Know the benefits of 'Space Puzzle Molding'
Space Puzzle Molding has a 'track record' 'second-to-none' for making early-to-market, quality, injection moldings for evaluation, confirmation and product launch, reports Tony Sands.
Subcontractor adds customised heavy-duty robotics
Prototype and pre-production injection tooling company Protoform has invested in two Deckel DMC 105V Linear 5-axis machining centres and a rotary pallet changer, trebling plant capacity.
Modular moulding halves tooling lead times
A modular plastics injection mould system halves that of traditional tooling and can be used for 'few-off' or producing thousands of parts.
The design dictated that the main body of the housing should be in PP/PE TV20, a hard durable plastic suitable for both the ventilator vanes and the swivel mechanism, but that the interface between the moving part and the rear housing should be an inner band of a softer grade of plastic to act as a bearing surface and partial seal.
The material chosen for this was TPE Santoprene which has a lower melt temperature than the PP/PE.
Tradition, and also advice from the materials experts, suggested that the only feasible route would be to inject the harder material first and to do this would mean creating a cavity into which the softer material to be injected later.
This method would necessitate creating a collapsible core for the centre of the tool, a simple and inexpensive exercise for the SPM Space Puzzle tooling, but considerable more expensive for the production tool.
With economy in mind for both prototyping and later production it was agreed to try an unconventional approach.
Space Puzzle Molding tools are renowned for their flexibility and the creation of two sets of 'horse-shoe' forms to create the outer surfaces of the component enabled the softer, lower melting point Santoprene to be injected first.
It was not necessary to create a whole new separate tool to complete the product since the Space Puzzle technique of assembling the tooling into a common support bolster allows for such switch operations to be readily accomplished.
The first matching 'horse-shoes' were then replaced by the larger ones illustrated in the CAD tooling image, leaving the first moulding in situ, and the higher temperature material injected.
It was anticipated that there would be a small degree of melt at the interface of the two materials but, as predicted, the working surface of the Santoprene remained perfectly formed and entirely functional.
Sean Halstead of protoform explained: "It was of critical importance that the inner functional face of the Santoprene, which has an injection temperature of 220 deg C, did not reach deformation temperature.
As a quick test we applied a strip of TPE Santoprene, of the same thickness as that in the design, to a heat source corresponding the injection temperature of 250 deg C for the PP/PE." He said: "We than measured the temperature on what would be the inner face.
We established that with the 1s of injection time needed, the deformation temperature was not reached.
We also optimized the design of the TPE part to reduce the possibility of heating due to friction." Halstead concluded: "The idea worked beautifully in practice and we were able to run series production of identical mouldings for prototypes in production intent materials.
It was bending the rules a little but it achieved the desired result".
"The economy of this approach was appreciated by the client and the technique was reflected onwards into production.".
• Protoform: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
