Product category:
Fabrication Subcontracting Services
News Release from: Quantum Engineering and Design | Subject: Laser cutting and marking
Edited by the Manufacturingtalk Editorial
Team on 30 March 2001
Engineering and profiling service is
operational
QED is pleased to announce that its applications centre, equipped with laser cutting and marking systems up to 200W, is now operational.
QED is pleased to announce that its applications centre is now operational This means that QED can now undertake process development studies for your application
The centre is equipped with a two axis 'flying optics' table with a working area of 700x800mm, integrated to this is a carbon dioxide laser with a power output of up to 200W.
There is also a laser dot matrix laser marking system with a laser power of 35W.
The facility can laser cut, mark or weld materials such as wood, MDF, plastics, foams, ceramics and some thin metals.
Obviously not all processes apply to these materials.
Process development charges depend on the level of resources required and are kept to an absolute minimum and in any event they are capped to a maximum value.
If a system is subsequently purchased any development costs are deducted from the system cost.
• Quantum Engineering and Design: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
