Product category:
Manufacturing seminars and workshops
News Release from: Smithers Rapra | Subject: Rapra Technology - 'green' plastics
Edited by the Manufacturingtalk Editorial
Team on 20 May 2005
2005 seminar drove the new 'green'
plastics
Seminar noted that compostable and degradable products seem limited to short-shelf-life products and that the aim should be sustainability before compostability/degradability.
Rapra Technology, Europe's leading plastics research and test house held a packed and successful one day seminar on compostable and degradable polymers and packaging at its Shawbury headquarters on Thursday May 5, 2005 Over 65 delegates attended the meeting in order to take part in the debate about the future of these materials and to hear presentations from Professor Gerald Scott, Innovia Films, Symphony Plastics, the Compost Association and Rapra Technology
This article was originally published on Manufacturingtalk on 25 Apr 2002 at 8.00am (UK)
Related stories
Book covers costs spectrum of plastics processing
Cost Management in Plastics Processing - Strategies, Target, Techniques and Tools - examines issues from how costs are calculated, to the effective use of machines and labour.
Assessing the life of plastics materials
'Practical Guide to the Assessment of the Useful Life of Plastics' provides practical guidance on assessing the useful service life of plastics.
Organiser David Ingles says that: "The meeting strongly confirmed that there is a growth future for both polymer compostables and degradables in a rapidly expanding market".
"Events such as these are vital for the progress of the sector." Ingles cautions however, that: "The lack of a coherent national waste strategy together with a lack of clarity on disposal routes is a significant barrier to the large scale adoption of any of the various existing technological solutions now waiting in the wings".
"There is an opportunity for Government and the industry to get together and thoroughly technology road map the future of the sector." The May 5 meeting also noted that current compostable and degradable products seem limited to short-shelf-life products and that the long term aim should be sustainability before compostability/degradability.
Further reading
Explore adhesion and bonding to polyolefins
Many applications of polyolefins require good adhesion to other substrates. A report discusses ways of improving adhesion to substrates.
Updated book gives introduction to composites
Use of composites by high volume car manufacturers is growing, and an updated version of an introductory book to composites in design and manufacture is now available.
Keep up to date on the European plastics scene
The European Plastics Directory, now in its 13th year, is a unique directory that will keep your company in touch with the European plastics industry across the whole of Europe.
The morning sessions were divided into compostable and degradable streams.
The polymer degradable issues raised include: Recyclability of oxo-degradable materials with reference to supplemental stabiliser systems and effect on the (mixed) waste stream; production of 'traditional' polymers from renewable sources; the test methods contained within ISO 13432 are designed to simulate an industrial composting situation; the concept of land acting as a 'Carbon sink' and the relative contributions of compostable vs degradable materials to biomass production; the draft for the new BS 8472 was discussed (currently at the comment stage).
Prof Scott believes there is a need for independent validation and verification.
Compostable issues raised included: Need for measure of compost quality such as PAS 100; Need for identification and labelling via logo and clarification of 13432 and applicability to home composting; Consumer awareness - all aspects of compostable packaging; the need for a rapid indicative test due to the lengthy/expensive tests that form 13432; Government involvement discussed - currently a lack of constructive dialogue (reference German and Dutch examples) In addition, a sizeable portion of the day was allocated to networking and there was a combined group discussion during which the aim was to identify key issues and barriers to progress Rapra Technology, Europe's leading independent plastics and rubber research organisation, reports a significant growth in demand for its expertise associated with compostable materials.The work in biodegradable and compostable materials technology was catalysed this year by financial support from the Telford-based Polymer Cluster; channelling funding provided from Advantage West Midlands and the European Regional Development Fund (ERDF).
This funding was used to develop a number of pioneering case studies, based in the Wolverhampton and Telford area and thus to progress the UK's compostable and biodegradable polymer materials know-how and testing work in general.
Based on these pilot studies and in response to the increased profile of 'biodegradable' and 'compostable' materials in the UK, Rapra has now fashioned a number of programmes to match.
These include: ?* Provision of testing to the defined European standard - EN 13432.
?* Related leading-edge research and development projects.
?* Participation in supply chain initiatives such as the UK Compostable Packaging Group.
?* Inception and hosting of technology-specific events.
?* Development of targeted research programmes.
Rapra's David Ingles is leading the project and says that: "Previously, the only approved facilities to conduct such materials testing and analysis programmes were on mainland Europe." Accordingly Rapra now has set up dedicated laboratories and pilot-scale facilities to deliver this service to the rapidly expanding UK market.
Ingles says that: "Rapra's test facilities will be a needed resource for all UK-based companies active in this market.".
• Smithers Rapra: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
