Product category:
Manufacturing conferences and exhibitions
News Release from: Smithers Rapra
Edited by the Manufacturingtalk Editorial
Team on 19 December 2005
Polymers in automotive fuel containment
discussed
The Second Rapra International Conference on Polymers in Automotive Fuel Containment generated a lot of discussion and questions amongst delegates concerning environment and materials.
The Second Rapra International Conference on Polymers in Automotive Fuel Containment generated a lot of discussion and questions amongst delegates The first two papers outlined the difficult environment for fuel systems, with Ralf Grunbaum of Volkswagen describing the legal, environmental and customer requirements for fuel systems
This article was originally published on Manufacturingtalk on 25 Apr 2002 at 8.00am (UK)
Related stories
Book covers costs spectrum of plastics processing
Cost Management in Plastics Processing - Strategies, Target, Techniques and Tools - examines issues from how costs are calculated, to the effective use of machines and labour.
Assessing the life of plastics materials
'Practical Guide to the Assessment of the Useful Life of Plastics' provides practical guidance on assessing the useful service life of plastics.
The main influences on the Passat fuel system were described as mechanical wear, system temperatures, refuel ability, electrical discharge, ventilation, fuel supply, pressure, safety, environmental legislation (affecting emissions) and fuel composition.
Current plastics used were HDPE, PA and POM, which of course raises the issues of joining different materials.
Intertek Caleb Brett followed up with an outline of global variations in fuel composition.
Further reading
Explore adhesion and bonding to polyolefins
Many applications of polyolefins require good adhesion to other substrates. A report discusses ways of improving adhesion to substrates.
Updated book gives introduction to composites
Use of composites by high volume car manufacturers is growing, and an updated version of an introductory book to composites in design and manufacture is now available.
Keep up to date on the European plastics scene
The European Plastics Directory, now in its 13th year, is a unique directory that will keep your company in touch with the European plastics industry across the whole of Europe.
ITT Industries has worked on new materials for fuel lines to raise permeability levels and high temperature resistance.
Materials being tested include polyamide 12, PBT and the fluoroplastics ETFE and PVDF.
Phil Spencer of Asahi Glass also described the combination of ETFE and polyamide 12 in fuel lines.
Dow Corning presented new fluorosilicones for hose.
DuPont gave a paper on new peroxide-cured fluoroelastomers.
Polykemi introduced a new nylon nanocomposite for injection/blow moulding fuel tanks, with the advantage of single material for recyclability.
Matrix Polymers described a new rotational moulding technology to meet new legislation on fuel permeation.
Professor Mallick from the University of Michigan-Dearborn described tensile and creep behaviour of a blow-moulded multilayered fuel tank.
Jim Doty of Solvay Advanced Polymers talked about innovative plastics for fuel systems to meet the increasing demands.
For example, conductive polymers to dissipate static and new grades to overcome the increased fuel permeability caused by increasing levels of alcohol.
Amodel PPA -a high performance polyamide - was shown to have good barrier properties to toluene, ethanol and isooctane.
Didier Houssier of EVAL Europe covered EVOH resins for fuel tanks.
Dr Wannek from IWV-3 described automotive fuel cells, www.h2cars.de lists the prototype cars to date.
The issues to tackle include costs, materials, hydrogen supply and performance.
Hydrogen storage is a key issue - liquefaction involves temperatures of -253 deg C and pressures of 10,000 lb/in2.
Greg Banyay of Ohio University described the potential use of polymer foams in hydrogen storage systems.
Testing is critical for fuel systems.
Dr Ho of the BHR Group described fuel system leakage software to predict Dr Nickie Smith of MERL covered testing methods for fuel permeation rates.
Diffusion-polymers.com described fuel permeation in a composite tank.
The conference generated a lot of debate.
There are many regulatory drivers on fuel systems such as emissions and recyclability, plus an increase in the service temperatures and pressures, and changes in fuel formulation.
Fuel cell technology is taking off.
This is an area for rapid growth and development for polymeric materials and the conference will be run again in 2007.
• Smithers Rapra: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
