Product category:
Moulding materials
News Release from: Smithers Rapra | Subject: High Performance Fillers - plastics
Edited by the Manufacturingtalk Editorial
Team on 31 March 2006
High performance fillers discussed in
Cologne
The second Rapra conference on High Performance Fillers attracted over 100 delegates to discuss emerging filler technologies, including nanofillers and natural fibre fillers and surface modifiers.
Judging by the success of this year's meeting, the second Rapra conference on High Performance Fillers (21-22 March in Cologne) seems to have achieved the difficult task of finding a niche in today's crowded conference season The meeting attracted over 100 delegates and speakers from Europe, the United States and Asia
This article was originally published on Manufacturingtalk on 25 Apr 2002 at 8.00am (UK)
Related stories
Book covers costs spectrum of plastics processing
Cost Management in Plastics Processing - Strategies, Target, Techniques and Tools - examines issues from how costs are calculated, to the effective use of machines and labour.
Assessing the life of plastics materials
'Practical Guide to the Assessment of the Useful Life of Plastics' provides practical guidance on assessing the useful service life of plastics.
Both filler producers and users were well represented.
The papers covered the markets for high performance fillers, and the main trends in those markets.
Specific topics covered included energy tyres, emerging filler technologies, including nanofillers and natural fibre fillers and surface modifiers.
Further reading
Explore adhesion and bonding to polyolefins
Many applications of polyolefins require good adhesion to other substrates. A report discusses ways of improving adhesion to substrates.
Updated book gives introduction to composites
Use of composites by high volume car manufacturers is growing, and an updated version of an introductory book to composites in design and manufacture is now available.
Keep up to date on the European plastics scene
The European Plastics Directory, now in its 13th year, is a unique directory that will keep your company in touch with the European plastics industry across the whole of Europe.
The European market for particulate fillers was estimated at 4.8 million tonnes by Professor Rothon with a predominance of carbon blacks and natural calcium carbonates, but also talcs, precipitated silicas, clays and aluminium hydroxide.
Around 20,000 tonnes of surface modifiers are used to improve filler performance, predominantly organosilanes, as discussed by Dow Corning.
About 5,000 tonnes of mica/annum are used in plastics, Quarzwerke showed data on mechanical and thermal properties of polypropylene copolymer and PA6 with mica fillers.
Dr Chris DeArmitt of BASF described experiments with fine calcium carbonate fillers in different thermoplastics at 10 wt%.
Modulus increased, yield strength was unchanged, elongation to break decreased and melt viscosity increased, but impact properties were unpredictable.
Imerys presented data on Opacilite, which is a flash calcined clay with applications as an extender for titanium dioxide.
Oxonica have been studying titanium dioxide and methods of reducing free radicals.
World Minerals outlined their experiments on the use of diatomaceous earth as a functional filler.
Electrolux have looked at filler antioxidant interactions in PP.
The University of Bayreuth, Germany, gave an overview of nanocomposites in films, foams and large-scale components.
Sasol has produced 'Disperal' and 'Dispal' high purity, highly dispersible, nano-sized aluminas as liquid and solid dispersions.
These have been used in polypropylene, polyamide and epoxy nanocomposites.
Professor Drzal described the use of nanographite platelets in epoxy and nylon composites - the modulus can be three times greater than with nanoclays.
Nanocyl have studied carbon nanotubes and are tackling the issues of proper dispersion and distribution to get the optimal material properties, including electrical conductivity as good as copper.
Professor Camino has used POSS in PP, PA6 and PBT and found that it formed a stable ceramic layer that protects the underlying material.
Hybrid Plastics are experimenting with variations in the POSS structure including trapping metal atoms in the cage.
Professor Kenig talked about enhancing the mechanical and thermal properties of adhesives with nanofillers.
Professor Hornsby talked about methods of improving performance in natural fibre reinforced thermoplastics.
Trovotech have worked on incorporating foamed glass fillers into polymeric materials, including a silver ion exchanged antimicrobial product.
Potters Europe gave a presentation on their glass microspheres.
Wollastonite fillers from RT Vanderbilt have been used to enhance stiffness, impact, mar and scratch resistance.
Eckart have special effect pigments to achieve aluminium, goldbronze and pearlescent effects.
New developments include oxidised, tinted aluminium pigments and pure iron flakes which also add conductivity and magnetic properties as well as optical effects.
• Smithers Rapra: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
