Longer bearing life needs whole life consideration

A Revolvo product story
Edited by the Manufacturingtalk editorial team Jun 26, 2007

Adrian Menzies of Revolvo discusses how reducing downtime due to bearing failure requires an approach where whole life costs are paramount.

Adrian Menzies of Revolvo explains why the lowest-cost bearing solution for the OEM is usually the most expensive for the end-user.

Despite all the recent discussions regarding whole life costs, the conflict remains between the requirement of OEMs to achieve the lowest installed cost for new equipment, and that of the end user for improved reliability and longer operating life.

The OEM is all too aware that quoting a high price can cost him an order; yet as for example the US space programme revealed on many occasions, things tend to go wrong sooner or later with equipment that is built down to a cost.

Unfortunately, despite the many painful lessons, the cost down philosophy still appears to permeate all levels of industrial supply, from bearings, to hydraulic and pneumatic components, drives, gearboxes et al.

What this means for the eventual end user of these products - probably a manufacturer with deadlines to meet - is a potential time bomb in his production system.

In today's world, with Downtime a key production indicator (KPI) this is clearly not acceptable.

Increasingly, manufacturing companies are waking up to the fact that to achieve performance gains and optimise the full potential of their existing assets, they must achieve improved production efficiencies.

However, to realise these efficiencies downtime must be minimised, which in turn means that a whole new approach of specifying components and equipment that might cost a little more initially, but are fitter for purpose and more economic over the longer term.

One product area that aptly highlights this philosophy is rolling bearings.

Overwhelmingly, solid bearings comprise the major segment of rolling bearings in use today, yet they are difficult to fit, impossible to inspect whilst in place, and even more difficult to replace when they fail.

However, because solid bearings are inexpensive, hardly anyone questions that they may not provide the most cost effective long-term solution in all applications.

They do not, of course, though the alternative of split roller bearings can be initially considerably more expensive, which is why they are generally used only in continuous process industries where bearing failures cannot be tolerated.

But surely the same is true in manufacturing industries: so why do process industries bear the additional cost? The answer is threefold: much easier bearing fitting - typically a split roller bearing takes only 15 percent of the time taken to fit a solid bearing; the ability to inspect the bearing in situ; and the ease and speed with which split roller bearings and their cartridges can be replaced if there is a problem, without requiring extensive machine dismantling.

From the technical, economic and pure design point of views, split roller bearings offer a host of advantages and cut downtime significantly.

Basically, the simplicity of fitting a split roller bearing, compared to a solid bearing, is a major factor in its longevity.

Unlike solid bearings, SRB bearings are totally split to the shaft, a design that both simplifies and expedites installation, and cuts downtime to approximately 1/8 of that required to replace solid bearings of the same size.

In addition, Revolvo SRB bearings can have a longer life span because they cannot be cross- located.

They also provide superior sealing arrangements, which means a longer bearing life with greatly reduced levels of maintenance.

A further advantage is that the design of Revolvo SRB split bearings allows for complete bearing removal and replacement by simply supporting the shaft.

There is no need to lift the shaft, or obtain access to the shaft ends, therefore expensive and awkward to handle lifting equipment is not required.

This intrinsic feature is extremely valuable, generally, but especially regarding large machines, where sheer weight and size can be a barrier to fast and effective servicing.

It allows for much faster bearing replacement, which can save continuous-type businesses a lot of money in costly downtime.

The example in Table 1 illustrates the savings in Downtime that can be accrued using SRB split bearings.

The data is taken from an actual example, where solid bearings were replaced by SRB split bearings due to the costs that were being incurred as a result of extended times for bearing installation and replacement.

Initial purchase costs for the SRB split bearing far outweigh those of the solid bearing.

However, this is the only area where solid bearings have the advantage.

Once the costs for labour to replace failed bearings, and production losses are considered, the positions are reversed with the total overall costs for the SRB split bearing being approximately 1/5 of those of the solid bearing.

Supporting the above illustration is the recent application of Revolvo SRB Split Bearings at a number of mines owned by Anglo Platinum in South Africa.

The SRB split roller bearings were employed to replace solid bearings on vent fans.

These fans are crucial to production, and with downtime costs that could reach R500,000 (GBP72,000) per hour, the ability of the SRB split roller bearing to be installed in just 15 percent of the time taken to fit a comparable solid bearing, meant that their downtime costs were kept to the absolute minimum.

The number of follow-up orders that Revolvo has received for its SRB Split Roller Bearings evidences the success of Anglo Platinum's conversion to SRB units.

To-date, orders in excess of R900,000 (130,000 GBP) have been received, providing split bearings for fans at a further 7 mines.

These bearing installations are by no means exclusive to the platinum sector: Revolvo also supplies SRB Split Roller Bearings for service on ventilation fans within the iron ore, chrome, gold, coal, paper and food sectors.

Find out more about this article. Request a brochure, download technical specifications and request samples here.
Send to a friend Send to a friend
Print this page Print this page
Bookmark this page Bookmark this page

Not what you're looking for? Search the site.

Back to top Back to top

Find out more about this article or product Arrow

Contact Revolvo

Contact Revolvo

Tel +44 1384 844000

Visit website

Other Revolvo stories

Contact Revolvo

More stories More stories

Newsletter sign up

Request your free weekly copy of the Manufacturingtalk email newsletter ...

Sign up now Sign up now

Articles by product category

All suppliers A - Z

A Pro-talk Publication

A Pro-talk publication