Product category:
Control systems, panels, HMIs, interfaces, screens
News Release from: R2 Controls | Subject: R108 Hypercore Microprocessor Core Module
Edited by the Manufacturingtalk Editorial
Team on 02 September 2004
Embedded control module is programmable
Microprocessor core module for embedded control automation is programmable in C or Basic for easy integration in controller projects where more than a simple 'stripped down' core module is wanted.
R2 Controls has announced general availability of the R108 Hypercore Microprocessor Core Module The Hypercore Microprocessor Core Module is designed to simplify integration and engineering of embedded microcontroller-based manufacturing process and automation projects thereby reducing the time to market and increase profitability
This article was originally published on Manufacturingtalk on 9 Mar 2005 at 8.00am (UK)
Related stories
Low-cost Modbus RTU enhances relay outputs
High performance, low-cost Modbus mixed signal remote terminal unit has enhanced relay control outputs for automation and control of industrial and field applications.
Digital RTU has enhanced control outputs
High performance, low-cost Modbus digital remote terminal unit has enhanced relay control outputs for automation and control of industrial and field applications.
Based on the Silicon Laboratories 8051 system-on chip processor, the Hypercore combines 64K FLASH, 128K SRAM and amazingly fast performance with a vast array of I/O, serial communications capabilities and connectors to enhance integration with most any controller project design.
The R108 Hypercore Microprocessor Core Module is designed for engineers who need more than a simple stripped down core module.
The R2 Controls Hypercore comes standard with up to 16 Precision Analog Channels with up to 12-bit Resolution.
Further reading
Machine construction profiles reduce dirt traps
For the MB Building Kit, Machine Building Systems has introduced reduced crevice- and dirt-free aluminium extrusions with fully enclosed grooves on one or more faces.
Ultra-thin ePC-Series made for hazardous usage
Nematron has introduced its 'ultra-thin' profile, ePC-Series of industrial computers with Class 1 Division 2 Hazardous Location rating for demanding HMI/SCADA applications.
2 12-bit Analog outputs are available.
The Hypercore is readily adaptable into the production platforms of many controller projects.
The R108 Hypercore Microprocessor Core Module incorporates the Silicon Laboratories C8051F020 microprocessor running at 22.1MHz with pipelined instruction architecture executing 70% of the instructions in 1-3 system clocks.
There are 64K Flash Memory and 128K SRAM with battery backup.
The Hypercore includes 8 12-bit high precision resolution and 8 8-bit resolution analog inputs as well as 2-12-bit analog outputs.
There are over 30 Digital I/O.
Communications capabilities include 2 Serial Ports, 1RS232 and 1 TTL.
SPITM and I2CTM are also supported.
A JTAG port is provided for connecting to a PC for programming in C.
Basic programming is accomplished through the Serial Port.
5 16-bit Timers are available.
The Hypercore operates at 5-9VDC and consumes less than.25 watts.
Power Monitoring and Sleep Mode functions are supported.
R2 Controls provides a choice of two Hypercore Module Development Kits to facilitate the rapid and effective utilization of the R108 Hypercore Microprocessor Core Module.
The "Basic" Hypercore Development Kit is used for programming in BASIC and includes the Development Board, the R108 Hypercore Core Module, the Power Transformer, a Serial Cable and a CD with the Basic Interpreter Software, the API, the operating instructions and sample programs.
The "Deluxe" Development Kit contains all of these components, plus a Programming Adapter and Cable, which enable the R108 Hypercore to be programmed in C.
The Basic Hypercore Development Kit is priced at $169.
The Deluxe Hypercore Development Kit is priced at $229.
The R108 Hypercore Microprocessor Core Module is priced at $79 (Quantity 1).
These new products will be available for purchase in August.
R2 Controls, is a Roseville, California-based manufacturer and distributor of industrial grade standard (off-the-shelf) embedded controller products and customized microcontroller solutions that deliver high performance, reliability and exceptional flexibility.
• R2 Controls: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
