Product category:
Manufacturing orders, contracts, financial reports
News Release from: Renishaw
Edited by the Manufacturingtalk Editorial
Team on 30 January 2006
Renishaw reports strong first-half
trading results
Metrology and spectroscopy company, Renishaw, has reported a 13% increase in revenue to GBP 81.6 million for the six month period ended 31st December 2005.
Renishaw, the world leading metrology and spectroscopy company, has reported a 13% increase in revenue to GBP 81.6 million for the six month period ended 31st December 2005, and operating profit up by 26% to GBP 13.9 million These are the first interim results produced by the company under the new International Financial Reporting Standards, and show particular growth in the Far East, where revenue increased by 32%, and in North and South America, which saw 20% growth
This article was originally published on Manufacturingtalk on 5 Sep 2008 at 8.00am (UK)
Related stories
Renishaw will showcase Renscan5 at TCT
Renishaw will demonstrate its Renscan5 5-axis coordinate measuring machine (CMM) measurement technology, which includes the award-winning REVO measuring head, at the TCT exhibition.
PC-based probing software use extended
Enhanced PC-based probing software is now available to thousands more machine tool users, said Renishaw, which has upgraded its Productivity+ Active Editor Pro software.
There was a 5% net reduction in Renishaw's Continental European revenues compared to the same period last financial year, primarily due to the shipment of a large initial stocking order of a dental product launched in the first half of 2004/2005.
With the exception of digitising, including dental, there was good growth in all product lines, especially spectroscopy.
Revenue benefited by GBP 2 million from currency exchange differences compared with the previous year's actual exchange rates.
Further reading
Measurement software developments go on show
Dynamic motion analysis software adds real-time velocity, acceleration, and vibration tracking to laser interferometer measurement systems.
Laser calibration offers precision, portability
Renishaw's lean-design XL-80 laser calibration system measures at 4m/s, raises environmentally-corrected accuracy to +/-0.5 ppm, warms up faster, weighs less and transports easier.
Ballbar analyses, diagnoses machine tool motion
Renishaw's QC10 ballbar system provides quick machine tool axes motion capability analysis, problem diagnosis, performance tracking and preventive maintenance.
Profit before tax rose to GBP 15.3 million (2004: GBP 12.4 million), resulting in earnings per share of 16.9p, an increase of 23%.
Net cash balances at 31st December 2005 were GBP 25.7 million (2004: GBP 23.2 million).
Renishaw's chairman and chief executive, Sir David McMurtry, reported that during the period a Representative office had been established in Turkey and the sales force has been substantially increased in India and the Far East, including Japan.
He reinforced that research and development remains key to group strategy: "As I stated at the Annual General Meeting in October, a number of new products have been introduced at recent exhibitions, in particular, at EMO held in Hannover in September.
The GYRO range of heads, to complement REVO and RENSCAN5 introduced in April last year in our co-ordinate measuring machine (CMM) product line were very well received and we anticipate that they will make a valuable contribution in our next financial year.
Also introduced were the OMP400 high accuracy strain gauge probe and on-machine verification software launched by our machine tool product line." Total research and development expenditure, including associated engineering costs, amounted to GBP 13.8 million (2004: GBP 12.1 million).
Sir David also reported that the Renishaw Group is currently establishing a software product development team at its Pune premises in India.
As previously announced, Renishaw has also acquired a 50% interest in PulseTeq, a small UK company, specialising in radio frequency coil electronics and other enhancements to magnetic resonance scanners for medical purposes.
Commented Sir David, "This investment illustrates our intention to exploit opportunities in the medical field by applying our in-house metrology expertise to this important new area of activity.
We have also acquired a 50% interest in Metrology Software Products Limited, another small UK-based company, to strengthen the development programmes for our CMM and machine tool product lines.
We are very pleased with the developments at these two associates since acquisition." There has also been significant activity in Renishaw's manufacturing operations.
A new anodising plant has been successfully commissioned at its Stonehouse factory in Gloucestershire, UK, and the manufacturing plant and machinery are now being transferred to this new location from its main site at New Mills, Wotton-under-Edge, UK.
In India, a manufacturing facility is being established at the recently acquired premises in Pune to complement Renishaw's existing manufacturing facilities in the UK and Ireland and to facilitate the introduction of new technologies into the worldwide organisation.
Total capital expenditure in the UK and overseas during the six months was GBP 7.2 million (2004: GBP 10.4 million).
Sir David also stated that the Board is continuing its review of the company's pension arrangements, the results of which are expected to be known during the second half.
In conclusion, Sir David said, "We confidently expect continuing progress in the Group's business in the remainder of the financial year." An interim dividend of 6.71p (2004: 6.10p per share) will be paid on 10th April 2006 to shareholders on the register on 10th March 2006. Request free introductory details about products from Renishaw ...
• Renishaw: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
