Product category:
Probes and sensors
News Release from: Renishaw
Edited by the Manufacturingtalk Editorial
Team on 12 June 2006
Focused metrology in Czech Republic
Renishaw is increasing its focus on the Czech Republic, where it will be introducing a new range of products at this year's MSV exhibition, being held in Brno from 18th to 22nd September.
Renishaw is increasing its focus on the Czech Republic, where it will be introducing a new range of products at this year's MSV exhibition, being held in Brno from 18th to 22nd September Part of the wider 'Brno Fair', MSV is the Czech market's most important show for metalworking and engineering technologies, and is located close to the offices of Renishaw, which was established in 2002 to offer support and demonstration facilities for local customers
This article was originally published on Manufacturingtalk on 7 Mar 2001 at 8.00am (UK)
Related stories
MCG gives rapid test of CMM performance
Users of CMMs are well aware of their advantages for the rapid and accurate checking of workpieces, but how often is the CMM checked? Renishaw's MCG gives rapid test of CMM performance.
New surfacing option for digitising software
The latest version of Tracecut, Renishaw's market leading digitising software, features a new optional surfacing module which will create true CAD surfaces suitable for export to any CAD system
Now in its 48th year, MSV has become a truly international exhibition, and in 2005 attracted 105,000 visitors from 58 different countries, with almost 2,300 exhibiting companies from 32 nations occupying 69,000 square metres of stand space.
This year it will run concurrently with the ITM, the 5th International Machine Tools Exhibition.
On show from Renishaw are products that will significantly reduce inspection times on both machine tools and co-ordinate measuring machines, and allow machines to run unmanned under full process control.
Further reading
Digitising software gets optional surfacing module
The latest version of Tracecut, Renishaw's market leading digitising software, features a new surfacing module which will create true CAD surfaces suitable for export to any CAD system
Pull-down arm for CNC lathe tool setting
Renishaw introduces a lathe tool setting system with a unique precision pull-down arm, building upon its reputation as the supplier of market leading repeatable tool setting arms
Scanner drives 5-axis CNC engine porting
Innovative porting technique with digitising routines, gives significant improvement over hand porting and 3-axis machining, allowing exact duplication of optimum IC engine port designs.
Other breakthrough products include a new angle encoder and high accuracy linear encoder for precision position feedback, and new software for motion system analysis.
At MSV, Renishaw is showing two new PC-based software products that offer significant time savings for users of machine tool probe systems.
Productivity+ Active Editor Pro is part of Renishaw's new generation of easy-to-use probing and process control software, which targets the entire spectrum of probe users.
The CAD front-end allows features to be identified with a single click, and the drag-and-drop interface uses the measured data to update machine parameters.
The result is a fully integrated metal cutting and probing program, which allows a machine tool to make intelligent decisions on the fly.
Renishaw OMV is a verification package that gives machine tool users powerful CMM-style 3D verification against a CAD model.
The software is targeted at manufacturers of complex and large parts, such as mould tools, and combines freeform and geometric features.
A straightforward point-and-click approach means that the user can see the inspection path as it is generated, and make changes if required.
In combination with Renishaw's non-lobing, high accuracy spindle touch probes, such as the MP700 and new OMP400 ultra-compact touch probe, Renishaw OMV provides unrivalled accuracy of part verification on machine tools.
The most significant advance in co-ordinate measuring machine (CMM) technology for 20 years, Renscan5 is a new enabling technology that will allow highly accurate, ultra high speed five-axis scanning measurement on CMMs.
Receiving its Czech premiere at MSV, this new technology allows the development of a range of breakthrough five-axis scanning products that will measure at speeds of up to 500 mm/second, and virtually eliminates the measurement errors normally associated with existing three-axis scanning systems.
The first product to take advantage of the new Renscan5 technology is REVO, a revolutionary measuring head and probe system that will maximise inspection throughput, whilst maintaining a high-level of system accuracy.
REVO uses synchronised motion when scanning to quickly follow changes in part geometry, without introducing its own dynamic errors.
This allows the CMM to move at a constant velocity along a constant vector whilst measurements are being taken, removing the inertial errors that result from acceleration of the machine during conventional 3-axis scanning.
The new TRS1 tool breakage detection system allows manufacturers to run machine tools unmanned, with complete confidence that cutting tools damaged during a machining cycle will be quickly detected, eliminating the risk of scrapped parts.
This innovative new unit projects a beam of laser light at a tool and monitors the scattered light that is reflected, to determine if the tool has been broken.
It uses tool recognition technology that distinguishes between the tool and coolant or swarf/metal chips, and is also fast and reliable under real machining conditions.
More reliable than conventional non-contact systems, visitors to MSV will see that the TRS1 comprises a single unit containing the laser source and detection electronics, enabling it to be mounted outside of the working envelope, safe from collision and saving valuable space on the table.
For visitors to MSV interested in motion control, Renishaw's new Signum family of rotary and linear position feedback encoders offer ruggedness and precision to deliver levels of performance previously possible only from fine-pitch systems too delicate for many industrial roles.
All encoders feature comprehensive Signum software that enables optimum set-up and real-time system diagnostics via a PC's USB port The Signum RESM angular encoder is a one-piece stainless steel ring with 20 micron scale marked directly on the periphery.
It features the IN-TRAC optical reference mark, which repeats, regardless of direction, at operational speeds of over 4,500 rev/min (52 mm diameter) and up to 85degrees C.
The Signum RELM high accuracy linear encoder comprises the SR readhead, Si interface and 20 micron RELM scale, which is offered in defined lengths.
Initially available in Invar, which provides a low thermal expansion of 1.4 micron/m/C, the RELM scale is offered with a choice of IN-TRAC reference mark positions and dual optical limits.
Together with the robust, yet highly precise 20 micron spars, this enables the RELM to offer accuracy to +/-1 micron and resolution to 20 nm, satisfying the most demanding precision motion requirements.
MSV visitors interested in precision motion system analysis, will be able to see QuickView, a unique software package from Renishaw designed to make their ML10 laser an even more flexible and powerful analysis tool.
For years, electronic engineers have relied on oscilloscopes to study high-speed variations in voltage or current.
Now, QuickView software provides mechanical engineers with a similar capability, allowing them to study minute variations in linear or angular displacement, velocity or acceleration.
With a simple graphical interface QuickView allows very flexible operation, avoiding the need for predefined measurement targets and sequences - just point and measure, ideal for ad-hoc system investigations.
Organised by Trade Fairs Brno, MSV, the 48th International Engineering Fair, will run concurrently with IMT, the 5th International Machine Tools Exhibition.
The International Engineering Fair will be divided into ten specialised branch sections that provide a complete overview of both the products and services offered and trends of development in the key areas of industrial production.
Products and services covered include: o Mining, metallurgical, foundry, ceramic and glass-works equipment o Materials and components for mechanical engineering o Drives, hydraulic and pneumatic systems, cooling systems and air-conditioning o Plastics, rubber and chemical industries o Tools, surface and thermal treatment o Energy equipment and heavy-current electrical engineering o Electronics, automation and measurement technology o Ecological technology o Transport, manipulation, industrial packaging, storage and logistics Since 1998, IMT, the International Machine Tools Exhibition has been held concurrently with MSV in even years.
As the biggest event of its kind in Central and Eastern Europe it is organised with the support of CECIMO, the European Committee for the Co-operation of the Machine Tool Industries (the Czech Union of Machine-Building Equipment Manufacturers and Suppliers joined CECIMO in 1996).
The last IMT fair in 2004 achieved a participation of 489 exhibiting firms from 25 countries in a net exhibition space of 17,700 square metres.
The 2006 IMT will feature the complete range of metal working and forming technologies ranging from automation to accessories. Request free introductory details about products from Renishaw ...
• Renishaw: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
