Product category:
Conveying, handling and end-of-line equipment
News Release from: Renold Chain | Subject: Renold Synergy chain
Edited by the Manufacturingtalk Editorial
Team on 12 April 2005
Chain still going 15 months at bottle
top plant
Bottle top maker's engineers experimented with chain from different manufacturers, but none lasted more than nine months, until one product was discovered that lasted 15 months.
A large manufacturer of bottle tops in the US has reduced downtime and increased production after installing British-made Renold Synergy chain The company manufactures bottle tops and runs its machines 24 hours a day, seven days a week
This article was originally published on Manufacturingtalk on 14 Dec 2004 at 8.00am (UK)
Related stories
Long-lasting chain boosts tyre production
A previous drive chain used on a tyre production line drives had to be changed every three weeks, the replacement product needs changing only every 12 weeks, reports the user.
The firm's engineers experimented with chain from different manufacturers but in every case it was lasting no more than six to nine months before needing replacement.
What's more, whichever chain they used suffered from rapid elongation, so regular adjustments had to be made involving the removal of chain links and precious lost production time.
Each time the chain was adjusted or replaced the machinery had to be stopped and productivity was lost that could not later be made up.
After advice from a leading US distributor Renold Synergy chain was installed and so far has been running for nearly 15 months without showing any signs of wear at all.
During this period machinery has not had to be stopped once to make adjustments to the chain and the increased performance is so marked that the company is intending to replace all the chain in its factories with Renold Synergy.
• Renold Chain: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page

