Product category:
Workholding - miscellaneous clamping systems, components
News Release from: Rietschle Thomas | Subject: Central vacuum system
Edited by the Manufacturingtalk Editorial
Team on 14 August 2001
Vacuum replaces air for clamping back
panels
To enhance its functional test procedures for back panels, the CTS Corporation has installed a central vacuum system at its High Blantyre (Glasgow) manufacturing plant.
To enhance its functional test procedures for back panels, the CTS Corporation has installed a central vacuum system at its High Blantyre (Glasgow) manufacturing plant CTS is a global manufacturer of back panels and back panel systems, with facilities throughout the US, Europe and Asia, and its Glasgow plant is ISO 9001 and BABT approved
This article was originally published on Manufacturingtalk on 24 Sep 2002 at 8.00am (UK)
Related stories
Intelligent vacuum system for robotic assembly
To service its automated manufacturing operation, the CTS Corporation has installed an intelligent vacuum system for robotic assembly at its High Blantyre (Glasgow) facility.
Vacuum pumps and compressors kept going
Following a market research study of its pump customer database, Rietschle (UK), is introducing a 24-hour Gold Breakdown Service.
Coating tube in clean and quiet conditions
Manufacturers of steel and aluminium tubes and profiles use anti-corrosion coating processes to reduce spoilage and damage. This tube-coating machine is not noisy or messy.
Rietschle (UK) designed the turnkey system, using two 300m3/h capacity COVAC side channel vacuum pumps, piggyback mounted in a remote pump room.
From there, service ducts supply vacuum to a series of general multipoint Automatic Test Equipment, maintaining the constant vacuum of 0.6 bar required to clamp the boards under test.
Functional tests are carried out on all products, and where appropriate, bed of nails fixturing is designed to provide high throughput and improved test coverage.
The Rietschle vacuum system has replaced a compressed air installation, which previously supplied air-operated piston clamping systems on the ATE equipment.
CTS's facilities manager, Allan Ross, explains why the switch to vacuum clamping has achieved better results: "When multi-pin testing was introduced for larger boards, we were getting 'phantom' failures with the piston operated system.
Closure wasn't even, and the initial reject rates were a problem for us since our total quality programme means that we carry out product test and verification at all stages of product manufacture.
We have found vacuum clamping quicker and more efficient than using compressed air.".
• Rietschle Thomas: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
