Product category:
Miscellaneous machine tools, gear cutting machines and equipment
News Release from: Kasto | Subject: Double end-working machine
Edited by the Manufacturingtalk Editorial
Team on 03 March 2006
Handling system determines end-working
efficiency
A system for delivering forgings from a manually-fed input conveyor to a special fixture in a double end-working machine ensures that the shaft ends are milled, drilled and tapped accurately.
A system for delivering forgings from a manually-fed input conveyor to a special fixture in a double end-working machine ensures that the shaft ends are milled, drilled and tapped accurately The two lines at Federal Mogul's Godalming, UK, factory that produce the eccentric shafts for BMW Valvetronic engines are each headed by a double end-working machine built in Italy by Caorle, whose UK sales and service agent is Kasto, Southampton
This article was originally published on Manufacturingtalk on 23 May 2001 at 8.00am (UK)
Related stories
High speed M-C cuts light alloys and plastics
The new Prestige machining centre for complex machining tasks in light alloys and plastics, manufactured by the Italian company, FOM Industrie, has been introduced to the UK.
Turning and parting-off heavy tube and pipe
A new range of large capacity, CNC turning and part-off equipment for tube up to 8in diameter has been introduced to the UK by Rivers Machinery under a sole agency agreement.
Since 2001, the lines have been working 18h/day, producing around 200,000 shafts/year.
Commented Graham Nicklen, engineering director of Federal Mogul Camshafts: "You must be able to depend on the machine at the start of a production line, otherwise all the others will be starved of parts.
The reliability of the Caorle machines has been excellent and would be our automatic choice if we needed to buy similar end-working machines." He went on to say that the supplier had engineered a very effective system for delivering forgings from a manually-fed input conveyor to a special fixture in the machine.
Further reading
Reversing tube bender solves headrest problem
RSM Industries' existing tube benders could not cope with the complexity of tubular steel headrest frames. A BEMA 'Reverse 25' 7-axis machine solved the problem.
Large capacity end-working machines marketed
The Italian manufacturer of facing, centering and end finishing machines, Caorle SpA, has appointed Rivers Machinery to sell and service its products in the UK.
Dubus machine cuts shower component costs
Sequential sawing, drilling and notching of aluminium extrusions on separate machines have been replaced by multiple machining in a single clamping in a Dubus cell at Coram (UK).
Here the part is held temporarily in the jaws, probed on the drive gear, released and reclamped in the correct angular and lateral positions.
Both are critical to ensure that the shaft ends are milled, drilled and tapped to the required accuracy.
Federal Mogul Camshafts is a long-term user of many types of end-working machine, but the Caorle CL132s on the Godalming site were the first to incorporate tapping, as the Italian company offers this as a standard function.
On other potential suppliers' machines, tapping heads were an option for which a very high premium was quoted.
The patented Valvetronic engine has a conventional intake cam, but also uses this secondary eccentric shaft to steplessly vary the timing and lift of the intake valves, which is claimed to yield efficiency improvements of 10%.
One line at Federal Mogul manufactures the shaft for the four-cylinder engine built in Hams Hall, near Coleshill, that goes into the BMW 3-Series.
The other line produces a very similar shaft for the V8 engine built in Munich for the 5- and 7-Series models.
Once the 380mm long forging is clamped in position, it undergoes machining operations using six tools, three in-line opposing each other at either side.
First is a mill that faces the ends, and in the case of the four-cylinder shaft, also mills a recess at one end only.
Next, a form drill centres, drills and counterbores the ends; followed by M6x1 tapping using through-tool coolant.
Total cycle time is a little over a minute.
The four- and eight-cylinder eccentric shafts are very similar, so both lines are able to produce either variant.
Operations further down the line are 4-axis turning, milling, bearing and cam grinding, deburring and polishing.
Concluded Nicklen: "A transfer line would be needed if production volumes were very high, but for heading up medium-volume lines, the Caorle machines are ideal as they are robust, and may be reconfigured relatively easily to produce a new component when the time comes." (Since these Caorle machines were installed, the manufacturer has brought greater flexibility to endworking with the introduction of new, more compact models with an automatic toolchanger.).
• Kasto: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
