Product category:
Sawing and cutting-off machines and automation systems
News Release from: Kasto | Subject: Automatic machining and sawing line
Edited by the Manufacturingtalk Editorial
Team on 19 December 2006
Machining/sawing line raises Al windows
output
An automatic machining and sawing line has capacity to increase production output at a UK aluminium windows factory from 300 to 1,000 units/week.
Aluminium window and door fabricator, Joedan Manufacturing, has installed an automatic machining and sawing line from FOM, Italy, with capacity to increase production output at the Tewkesbury, UK factory from 300 to 1,000 units/week The planned increase in new business will come from growth within the sector coupled with winning contracts from smaller fabricators
This article was originally published on Manufacturingtalk on 23 May 2001 at 8.00am (UK)
Related stories
High speed M-C cuts light alloys and plastics
The new Prestige machining centre for complex machining tasks in light alloys and plastics, manufactured by the Italian company, FOM Industrie, has been introduced to the UK.
Turning and parting-off heavy tube and pipe
A new range of large capacity, CNC turning and part-off equipment for tube up to 8in diameter has been introduced to the UK by Rivers Machinery under a sole agency agreement.
The latter will find it increasingly difficult to compete using manual and semi-automatic machinery against a background of ever more stringent regulations governing the design and manufacture of new windows and doors.
Supplied through KASTO, Southampton, FOM's UK sales and service agent, the line and associated rearrangement of the shop floor represented an investment by Joedan of GBP 250,000.
It is the third generation of production plant that the company has used in its 21-year history.
Further reading
Reversing tube bender solves headrest problem
RSM Industries' existing tube benders could not cope with the complexity of tubular steel headrest frames. A BEMA 'Reverse 25' 7-axis machine solved the problem.
Large capacity end-working machines marketed
The Italian manufacturer of facing, centering and end finishing machines, Caorle SpA, has appointed Rivers Machinery to sell and service its products in the UK.
Dubus machine cuts shower component costs
Sequential sawing, drilling and notching of aluminium extrusions on separate machines have been replaced by multiple machining in a single clamping in a Dubus cell at Coram (UK).
The first was a sequence of manual routing, milling, drilling and sawing machines, which was slow and required extensive marking-out of the profile by hand; while the second generation involved automatic double mitre saws and a stand-alone machining centre to complete the remaining operations in one further operation.
Now that all machining is included in the FOM line, higher production output can be achieved in a given factory area without increasing operational overheads, advised Joedan's managing director, Kelvin Ashby.
Moreover, the current single-shift working can be supplemented as required to include a 6.00 pm to 10.00 pm twilight shift with minimum extra labour cost.
Accuracy of machining is also better, all features now being within 0.2mm of nominal size, and repeatability from batch to batch is exemplary.
The other significant benefit of one-hit production is a reduction in the potential for handling damage, as there is no need for part-finished, pre-painted material to be wheeled around on trolleys.
Joedan manufactures its products using aluminium profiles from group company, Architectonics Systems, and from Sapa Building Systems.
It consequently uses two window processing software packages, both of which link into the FOM control software.
Approximately 30% of output goes to Joedan's local retail outlets, the remainder being supplied to the trade nationwide, principally for use in new domestic houses, apartment blocks, schools and light commercial buildings.
Windows and doors are always bespoke, manufactured to customer requirements that come in by fax or e-mail and are entered into the firm's host computer.
Jobs are scheduled down to the production line, where the programming software recognises the type of product.
On entry of overall window or door dimensions, the control works out automatically the number of individual parts needed, their length, angle of cut and machined features required.
The appropriate extrusion is loaded by hand in lengths of up to 6.8m onto the input table.
A gripper on a powered carriage external to the machining area holds one end of the extrusion and effects longitudinal (X-axis) motion of the material under CNC while it is undergoing machining and subsequent sawing.
The twelve 2-axis milling / drilling tools arranged around all four sides of the profile in the machining centre module, and the adjacent circular blade in the sawing module, all have cross and/or infeed movement but no X-axis travel.
After machining is complete, which includes a choice of mitre cut from -20 deg through right angles to +20 deg, each set of components is transferred to the output table and from there to the fabrication area for completion of the widow or door frames.
The FOM line at Tewkesbury, which was installed in September 2006, is one of the most advanced operating anywhere in the world and is the only example of such a line in the UK making aluminium, as opposed to PVCu, windows and doors.
Joedan's chairman and founder, John Purcaro, who was the driving force behind the investment, prefers to manufacture aluminium products for a number of reasons.
He considers them to be of higher specification than PVCu, stronger and more durable, more aesthetically pleasing and less susceptible to movement under extremes of temperature.
His group's relationship with FOM goes back to mid 2005, when Architectonics Systems bought the Italian manufacturer's polyamide rolling machines, which insert a thermal barrier between two aluminium extrusions.
Excellent support over the past 18 months persuaded the company to go back to FOM for the machining and cutting line, the installation of which, complete with teleservice link to Italy, has been an unqualified success, according to Ashby.
• Kasto: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
