Product category:
Airline equipment, filters, drains and traps, control systems, etc.
News Release from: Rosedale Products Europe | Subject: Backwashing bag type fluid filter
Edited by the Manufacturingtalk Editorial
Team on 05 June 2006
Backwashing bag type fluid filter
Rosedale Products has developed a backwashing bag type fluid filter in which pressurised air can be released into the inside of the filter bag in the opposite direction to the normal filtering flow.
In an on-going drive to reduce the maintenance costs of its filters, Rosedale Products Europe has developed a backwashing bag type fluid filter in which pressurised air can be released into the inside of the filter bag in the opposite direction to the normal filtering flow Accumulated particulate contaminant on the surface of the bag is dislodged and transported to a safe location
This article was originally published on Manufacturingtalk on 4 Apr 2006 at 8.00am (UK)
Related stories
Separate solids from liquids efficiently
Particulate separators use centrifugal action to remove particulate contamination from fluids such as sand, paint flakes, metal chips, chemical scale and other debris down to 50 micron.
Filters ensure fluid cleanliness during transfer
Filters ensure that when fluids - such as hydraulic fluids - are put into or removed from bulk containers, anything from drums to tankers, they are delivered at a specified cleanliness.
The units can be cycled through many backwashes, before any further servicing is required.
Thus filter bags which are normally disposed of when full, can be re-used many times.
The actual number of cycles depends on several factors.
Further reading
Multi-basket strainers and bag filters save space
Rosedale multi-basket strainers and bag filters offer a wide variety of flow capacities.
Dual filters offer additional capacity
Designated Model 82, fluid filters from Rosedale have two housings piped together with common porting for parallel operation.
For instance felt media will have a shorter life than monofilament nylon.
Contamination type and size also have an effect on bag life and the period between backwashes.
As well as reducing the cost of media disposal and replacement, backwashing filters have other benefits: Less downtime means increased productivity, labour costs are slashed and operator exposure to potentially hazardous substances is substantially reduced.
In a standard Rosedale bag filter the fluid flow is from inside the bag outwards so that dirt accumulates on the inside of the bag; an external perforated support cylinder retains the bag against the flow.
In a backwashing filter however the bag is positioned between internal and external support cylinders.
These retain the bag against the filtering flow which is from outside the bag inwards and the backwashing air flow which is passed through the bag from the inside to the outside.
Two gauges fitted to the housing show the pressure differential between the dirty and clean sides of the unit.
An increasing pressure differential indicates the level of contamination build-up on the outside of the bag.
When a pre-determined pressure differential is reached, filtering is suspended by closing valves in the inlet and outlet pipework to isolate the normal filtering system.
Another valve is opened to the backwashing pipework, then a button is depressed allowing factory air to the centre of the bag to shock the backwashing system.
It loosens the accumulated contaminant which is flushed away for disposal via the backwashing valve.
The procedure takes about 30 seconds after which the valves are returned to their normal positions and filtering is resumed.
Rosedale Backwashing Filters use standard 762mm long filter bags manufactured from any of the standard media types.
Carbon steel or 316 stainless steel housings rated at 10 bar have seals and valves manufactured from a variety of materials to suit the application.
Pipe sizes are 2, 3 or 4 inches with either BSPF female threaded connections or ANSI flanges.
The foregoing description refers to the use of bag filters but backwashing is equally suitable for coarse filtration systems using stainless steel meshes rather than filter bags.
These filters will operate for long periods without the need to open the housing for cleaning.
• Rosedale Products Europe: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
