Product category:
Drives, motors and power transmission, couplings, clutches
News Release from: Sibus | Subject: Agitated Fluidised Trough Dryers
Edited by the Manufacturingtalk Editorial
Team on 16 October 2000
New concept for drying friable, granular
materials
Sibus introduce a new concept for the drying of friable, granular, flaked or other 'formed' materials - the innovative range of Agitated Fluidised Trough (AFT) Dryers.
Sibus introduce a new concept for the drying of friable, granular, flaked or other 'formed' materials - the innovative range of Agitated Fluidised Trough (AFT) Dryers These dryers are based on the 'fluid bed' principle but without the poor energy efficiencies, excessive air volumes and hygiene problems associated with conventional flat deck fluid bed and band dryers
This article was originally published on Manufacturingtalk on 16 Oct 2000 at 8.00am (UK)
Related stories
Reduce the moisture content of process slurries
The Sibus Rapid Air Swept Dryer (RAS) will reduce the moisture content of process slurries, pastes or other wet material used in the manufacturing process industries.
The AFT Dryers have a unique U-shaped drying chamber, specially designed gentle paddle rotor and a unique 'nose' screen that the material is subject evenly to the low volume hot air without the risk of screen blockage.
The result is super efficient drying with low air flow, high energy efficiency and with variable temperature drying zones to give complete control over the drying process - all controlled via a 'Touch Screen' PLC panel.
Other key advantages include: Significantly lower footprints; Complete dryer clean out; 'First in - first out' material drying principle'; Precise control over variable bed depth.
• Sibus: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
