Latest news on Manufacturingtalk categorised by supplier
Schuler Systems
Address:
Bagnhofstrasse 41
Goeppingen
D-73033
Germany
Telephone: (Germany) +49 71 61 66 829
http://www.schulergroup.com
Our RSS feed for news from Schuler Systems
Request to receive our free email newsletter each week
Listing of all 18 news releases from Schuler Systems:
Servo-drive press raises output by 40%
User application article German sub-contract sheet metal components supplier reported that a servo-drive blanking and forming press had raised output by 40%, when compared with mechanical presses.
News from Schuler Systems ( 8 July 2008)
Stacking systems protect stamping blank edges
Stacking systems for shaped and contoured sheet metal blanks have an intermediate-stop function and ensure the surface and edges of the blanks are protected.
News from Schuler Systems ( 7 July 2008)
Modular tri-axis transfer ups press output by 10%
The AT 1 tri-axis transfer press feed can reach speeds of up to 200 strokes/min in fast automatic blanking and forming presses.
News from Schuler Systems ( 4 July 2008)
Knuckle-joint presses have longer slide stroke
A modified drive on Schuler knuckle-joint presses give longer slide stroke and enable fast and flexible production of a wide range of parts owing to more die mounting space.
News from Schuler Systems ( 6 May 2008)
Presses offered for forming high-strength steels
Good forming characteristics are combined with high rigidity levels by using specialised hot pressing systems to raise the tensile strength of hot forming steels in-process.
News from Schuler Systems ( 2 February 2005)
Laser welding will make aircraft lighter
Technical background article The main focus of laser welding aircraft structures is on the development and testing of new plant concepts, two-sided-simultaneous laser welding and on welding in areas with restricted access.
News from Schuler Systems ( 4 January 2005)
Systems offered for forming high-strength steels
User application article Through the hot forming process, high-strength steels gain higher rigidity and good forming characteristics can be combined with high rigidity levels during the cooling process.
News from Schuler Systems ( 4 January 2005)
Laser trims and profiles hydroformed parts
Specifically designed for the finishing of hydroformed parts, a five-axis laser system is a highly flexible tool designed for cutting complex shapes and trimming end-geometries in 3D.
News from Schuler Systems (31 December 2004)
Customisable laser system welds and cuts in 2D, 3D
Laser profiling and welding system for flat and 3D components can be customised with options on bed lengths, axis configurations and laser heads for systems exceeding 20m.
News from Schuler Systems (29 December 2004)
Linear motor drive press stamps out micro-parts
Freely programmable, linear motor powered press can be used as a flexible production machine for micro-components or a number can form a modular multi-stage unit.
News from Schuler Systems ( 6 December 2004)
High speed roll feeder now has direct drive
Further revisions made to a high-speed roll feed system that serves high speed blanking presses include a direct drive, so that it no longer requires mechanical components such as gears and shafts.
News from Schuler Systems ( 1 December 2004)
Retrofit crossbar feeds at up to 13 strrokes/min
Transfer press crossbar feeder technology, that allows workpiece orientation, has now been applied to link stand-alone mechanical and hydraulic presses to raise output by up to 13 strokes/min.
News from Schuler Systems (30 November 2004)
Laser welding to make aircraft structures lighter
Technical background article At the recent EuroBLECH show in Hannover, Germany, Schuler Held revealed the development work it been doing on the 3D, two-sidesd simultaneous laser-welding of Airbus 380 wing stringers.
News from Schuler Systems (30 November 2004)
Crossmembers 3D laser cut after hydroforming
User application article Developed specifically for finishing hydroformed components, a five-axis laser 3D profiling system is working with a hydroform press producing automotive crossmembers for an automotive cowl section.
News from Schuler Systems (30 November 2004)
Power press builder provides extensive services
Power press builder provides fast sales and service support ranging from repairs and spare part provision to servicing, preventive maintenance, production support and modernization.
News from Schuler Systems (29 April 2004)
Modular stamping system designed for SMEs
Standardized, modular production concept covering the whole spectrum of metalforming provide solutions for the manufacturing needs of SME component suppliers.
News from Schuler Systems (22 April 2004)
Hydraulic press line has cylinder selection
User application article In spring 2004, the stamping plant of Mayflower Vehicle Systems in Castle Bromwich/UK launched production on a new hydraulic press line with a total press capacity of 105,000kN.
News from Schuler Systems (22 April 2004)
Draw high tensile steels on existing presses
The latest Schuler CNC hydraulic deep drawing presses can control material flow for producing pressings in high tensile steels.
News from Schuler Systems (23 July 2001)
