Micro-sensors measure very low pressures
Piezoresistive pressure sensors accurately measure ultra-low pressure in very small housings.
Sensortechnics' new PUL piezoresistive pressure sensors accurately measure ultra-low pressure in very small housings.
A completely new micromachined structure provides offset temperature compensation and virtually no position sensitivity.
The new generation pressure sensor chip improves temperature effects and mechanical stress errors for an overall enhanced sensor performance.
PUL ultra-low pressure sensors are ideally suited for demanding low pressure measurement.
Applications include respiration, anesthesia and HVAC.
Miniature housings with different pressure ports enables OEMs to use PUL sensors in nearly every design.
Important features of the new PUL sensors are: * Pressure ranges from 0 - 2.5mbar to 0 - 75mbar.
* Virtually no position sensitivity.
* Offset temperature compensated.
* Very low warm-up and long term stability error.
* Miniature housings with different tube connections.
With the addition of the PUL Series of ultra-low pressure sensors to the already established low pressure sensor range, Sensortechnics can now offer Original Equipment Manufacturers the ability to measure as low as 0-2.5mbar FS using different miniature housings.
The new PUL pressure sensors are exclusively available from Sensortechnics.
Not what you're looking for? Search the site.
Tel +44 1788 560426
-
CLC sensor offers contact-free level monitoring
The CLC series from Sensortechnics uses a contact-free capacitive sensor technology to continuously measure the fill level of liquids as well as granular or pulverised materials. -
Oxygen sensors offer high stability
Sensortechnics, supplier of sensing and fluidic control devices and integrated systems, has designed oxygen sensors for oximeters, oxygen concentrators and conservers, gas detection systems and more. -
Isolated diaphragm solenoid valves
Sensortechnics has launched a new series of isolated diaphragm solenoid valves from Parker Life Sciences. -
Barometric pressure sensors
Sensortechnics' new barometric pressure sensors BSDX-BARO offer OEM customers very cost-effective and precise air pressure measurement in the range of 800 -1100 mbar absolute. -
Pressure sensors cope with extremes
Sensortechnics' piezoresistive 40PC series from Honeywell now offers gauge pressure measurement in a wide pressure range from 50 mm Hg to 500 psi (67 mbar to 35 bar).
Articles by product category
-
Machine Tools: Cutting (4,195)
- Machine Tools: Cutting (6)
- CNC lathes (280)
- CNC turning centres, mill/turning, multi-tasking centres, horizontal and VTLs. (349)
- CNC automatic lathes (291)
- Machining centres - all types (157)
- Horizontal machining centres (HMC) (154)
- Vertical machining centres (VMC) (330)
- 5-axis (3+2 axes and continuous path) machining centres (151)
- Flexible machining cells and systems (FMS) (84)
- Manual lathes and manual/CNC (combination or half-NC) lathes (35)
- Milling, boring and routing machines - manual and CNC (140)
- Abrasive machining - manual and CNC machines (224)
- Drilling machines and drill/tap centres (50)
- Pick-up spindle turning, multi-tasking, turning and machining centres (46)
- Honing, polishing, burnishing and lapping (33)
- Rotary and linear transfer machines (48)
- Sawing and cutting-off machines and automation systems (125)
- Large milling and boring machines (over 2000mm in X) (84)
- Miscellaneous machine tools, gear cutting machines and equipment (103)
- Control systems, DROs, etc, for machine tools (270)
- CAM, software, off-line programming, for metal cutting machine tools (744)
- Miscellaneous machine tool equipment (fixtures, rotary tables etc.) (164)
- Bar feeders, loaders and parts catchers (57)
- Micro- and nano-machining (30)
- Portable power tools (128)
- Machine spindles and spindle attachments (31)
- Probes, sensors, tool detection, calibration for machine tools (81)
-
Machine Tools: Metalforming, shearing, folding and punching (1,650)
- Machine Tools: Metalforming, shearing, folding and punching (3)
- Power presses, mechanical (48)
- Power presses, hydraulic (51)
- Forging presses, hammers and screw presses (6)
- CNC punching and profiling (187)
- CNC plasma-arc and oxy-fuel gas cutting/profiling machines (83)
- CNC laser cutting and profiling machines (166)
- CNC water jet cutting and profiling machines (138)
- Guillotines, shears, circling and notching machines (8)
- Structural bending machines & steelworkers (13)
- CNC laser machining, engaving and welding (22)
- Pressbrakes and folding machines (85)
- Press tools - design, manufacture and usage, CAD/CAM, software (66)
- Forming, swaging and extrusion machines (8)
- Cold roll forming systems and software (13)
- Special purpose presses and equipment (58)
- Jigs, fixtures, special tooling and gauging (9)
- Control systems for metalforming machines and equipment (23)
- Press shop and sheet metal working automation, slitting, shearing (99)
- EDM diesinking (64)
- EDM wire cutting (131)
- EDM wire and diesinking, ECM, miscellaneous equipment (26)
- CAM and software for sheetmetal, punching, profiling, EDM, etc (145)
- Tubeworking: bending, cutting-off, profiling and end working (86)
- Miscellaneous metal forming machines (wire, canning,etc) and equipment (19)
- Metalforming lubricants (48)
- Laser and high energy beams - machining, forming, processing (45)
-
Machine Tools: moulding (1,177)
- Machine Tools: moulding (1)
- Injection moulding (200)
- Blow moulding (16)
- Extrusion machines (39)
- Second operation equipment (15)
- Profiling, trimming, routing and drilling (13)
- Joining and bonding (21)
- Handling and automation equipment (88)
- Mould and die making, machining, CAD/CAM, software (261)
- Rapid prototyping/manufacturing machines, systems, equipment (172)
- Diecasting machines and equipment (32)
- Moulding materials (231)
- Diecasting materials (4)
- Metals foundry, materials and equipment (52)
- Sub-contract plastics machining services (3)
- Special purpose moulding machines and systems (29)
-
Cutting tools (1,973)
- Cutting tools (12)
- Turning tools (182)
- Milling cutters (323)
- Drilling, boring and reaming (145)
- Tapping, chasing and thread rolling tools, attachments (10)
- Special purpose and multi-function tooling, broaching, etc. (78)
- Tool and cutter grinding (139)
- Tool and cutter manufacturing (23)
- Abrasive grinding wheels, abrasives (79)
- Honing, lapping and burnishing (8)
- Saw blades (9)
- Circular saws and abrasive discs (3)
- Tool identification and handling (16)
- Tool management systems, handling and software (50)
- Tool and cutter pre-setting (34)
- Tooling services (10)
- Toolholders (104)
- Swarf management equipment (6)
- Threading tools (55)
- Workholding - miscellaneous clamping systems, components (221)
- Cutting lubricants, coolants, systems and treatment (221)
- Tooling materials and inserts (75)
- Chucks and collets for rotational work (94)
- Vices, chucks, towers, pillars, cubes, tombstones - prismatic work (76)
-
Welding and Joining (1,591)
- Welding and Joining (2)
- Resistance welding equipment (47)
- Arc welding equipment, manual and automatic (338)
- Automatic and robotic welding systems (199)
- Mechanical fasteners, fixing and joining, and equipment (302)
- Adhesives and adhesive bonding equipment (232)
- Special purpose joining equipment (33)
- Handling and automation equipment (7)
- Non-destructive testing equipment (20)
- Seam-tracking, guidance systems (21)
- Welding ancilliaries (176)
- Laser and electron beam welding (95)
- Thermal and weld hardfacing, coating and overlaying (9)
- arc-air gouging, lancing equipment (11)
- Weld preparation equipment (14)
- Manual oxy-fuel gas cutting, welding, brazing soldering and cutting (27)
- Manual plasma-arc cutting equipment (7)
- Welding consumables, rods, wires, fluxes, powders (34)
-
Finishing, preparation, coating and painting (1,145)
- Finishing, preparation, coating and painting (3)
- Deburring, de-flashing and fettling (142)
- Washing and pretreatment (159)
- Heat treatment, furnaces, quenching media (10)
- Plating and plating systems (61)
- Coatings and coating systems (144)
- Paint and painting systems (66)
- Polishing, buffing and surface texturing (46)
- Integrated systems (11)
- Quality control (6)
- Cleaning media and cleaning systems (358)
- Sealing equipment (13)
- Metals heat treatment, mechanical stress relieving (21)
- Thermal processing equipment (drying, curing, etc) (105)
-
Automation, assembly systems and computer systems (1,294)
- Automation, assembly systems and computer systems (4)
- System integration services (69)
- Automation and assembly systems (78)
- Automation and assembly equipment (264)
- Consultants (automation systems) (3)
- Control systems, panels, HMIs, interfaces, screens (465)
- Industrial computers, PCs, PLCs, notebooks, etc. (268)
- Automation, control software (143)
-
Manufacturing support (9,138)
- Manufacturing support (9)
- Robots and robotic systems (392)
- Actuators, motion systems, etc (345)
- Gantries, manipulators and positioners/positioning tables (47)
- Positioning stages - linear, rotary, multi-axis (69)
- Air compressors (119)
- Airline equipment, filters, drains and traps, control systems, etc. (145)
- Monitoring and sensor equipment and systems (1,477)
- Electrical systems (995)
- Plant services equipment, filters, filtration systems, etc (424)
- Industrial gases and associated equipment (101)
- Pumps and valves (242)
- Maintenance planning, services and equipment (409)
- Drives, motors and power transmission, couplings, clutches (1,489)
- Lubrication - lubricants and lubrication systems (166)
- Laser marking systems (149)
- Pneumatic equipment (341)
- Seals, gaskets, bushes, etc (117)
- Hydraulic equipment and fluids (155)
- Hand tools - wrenches, etc. (25)
- Component marking, printing and labelling systems (non-laser) (215)
- Bearings and guideways - rotary and linear (299)
- Dispensing, filling and weighing systems (269)
- Machine and production line ancillaries, miscellaneous equipment (466)
- Metals and materials, stockholding (187)
- Benches, work stations, platforms, lifts, parts storage and cabinets (72)
-
Industry news, commerce, exhibitions, education (8,503)
- Industry news, commerce, exhibitions, education (5)
- Manufacturing industry news (2,402)
- Manufacturing orders, contracts, financial reports (1,193)
- People in Manufacturing (1,018)
- Manufacturing dealerships, agencies and acquisitions (1,578)
- Manufacturing conferences and exhibitions (328)
- Manufacturing seminars and workshops (225)
- In-house manufacturing exhibitions, Open Days, Roadshows, events (163)
- Industrial and management training courses (278)
- Manufacturing exhibitions (323)
- Industrial consultancy services (430)
- Industrial Development Agencies and services (74)
- Professional Associations, Institutions, Institutes, Standards bodies (322)
- Research and development, technical centres, universities (100)
- Manufacturing finance: production investment support (54)
- Manufacturing finance: insurance services (10)
-
Packaging (2,890)
- Packaging (4)
- Adhesives and tapes materials, equipment and services (25)
- Bags and bagmaking materials, equipment and services (78)
- Bottles, bottling and jars materials, equipment and services (181)
- Boxes and cases materials, equipment and services (44)
- Bulk containers materials, equipment and services (28)
- Cans, canning and tins materials, equipment and services (22)
- Carton converting materials, equipment and services (26)
- Closures, fasteners and dispensers materials, equipment and services (92)
- Coding and marking materials, equipment and services (98)
- Contract packing (19)
- Control and inspection equipment and services (74)
- Conveying, handling and end-of-line equipment (293)
- Filling, filling equipment and services (42)
- Film materials, equipment and services (101)
- Food Packaging (179)
- General packaging materials, equipment and services (857)
- Label converting and sleeving materials, equipment and services (156)
- Packaging management software (36)
- Packaging design materials, equipment and services (37)
- Pharmaceutical and medical packaging (56)
- Printing materials, equipment and services (196)
- Packaging trade organisations (51)
- Weighing and counting equipment (112)
- Packaging exhibitions, conferences and seminars (76)
- Anticounterfeiting technology (5)
-
Specialist Manufacturing Sectors and Metals Producing (1,404)
- Metals processing plant and equipment (142)
- Rolling mills and equipment (99)
- Metals finishing lines and equipment (33)
- Motor sports manufacturing: machining, software, CAM (69)
- Motor sports manufacturing: fabrication and assembly (39)
- Motor sports manufacturing: specialist coating and finishing (4)
- Food and drink manufacturing: processing equipment (290)
- Food and drink manufacturing: packaging and bottling equipment (177)
- Pharmaceutical/medical manufacturing: production equipment (64)
- Pharmaceutical manufacturing: handling and packaging equipment (48)
- Pharmaceutical manufacturing: production software (4)
- Cosmetics manufacturing: packaging and dispensing (3)
- Electronics manufacturing: equipment, automation, software (263)
- Electronics manufacturing: quality control equipment, software (116)
- Books, CDs and Videos (213)
-
IT for manufacturing management and production (4,073)
- IT for manufacturing management and production (19)
- Production costing, job estimating and quotations software (69)
- Business management systems, including SCADA, assets, projects, CRM (400)
- Supply chain management and software (146)
- Enterprise Resource Planning software (ERP) (742)
- Manufacturing Resource Planning software (MRP) (54)
- Factory data acquisition (non-RFID), data logging (318)
- Warehouse and logistics management software (49)
- Production, shopfloor planning, control and scheduling software (144)
- Work-in-progress tracking software (46)
- Lean Manufacturing (42)
- RFID systems, wireless hardware and software (262)
- EDI - electronic data interchange and software (8)
- Document and workflow management (198)
- Industrial networking and communications (353)
- CAD systems, CAD translation and solid modelling for production (174)
- Analysis, simulation and mathematical software for production (153)
- Scanners, imagers for reading codes, bar codes, labels, etc. (22)
- Product life cycle management (PLM) (121)
-
IT for engineering, industrial and commercial applications (2,726)
- IT for engineering, industrial and commercial applications (11)
- Manufacturing IT Platforms (68)
- Programming aids and applications (352)
- Training Aids and eCommunication (485)
- HR, Payroll, Time and Attendance software (47)
- Data acquisition software and systems (146)
- Manufacturing Information Technology systems (356)
- Used machinery and machine tools (37)
-
Materials handling and storage (1,042)
- Materials handling and storage (9)
- Standard fork lift trucks and attachments (104)
- Stacking and picking, aisle trucks, tower trucks, container trucks (62)
- Other lifting, loading and elevating equipment (79)
- Automated handling systems, AGVs, integrated handling systems (39)
- Cranes, hoists, winches, chains and ancillaries (106)
- Conveyor systems (production and general purpose) (243)
- Specialist and bespoke handling equipment and services (46)
- Storage hardware and storage and racking systems (85)
- Miscellaneous equipment, batteries, battery charging systems, etc (45)
- Tugs, tractors, trucks, pushers, jacks, trollies, skips, etc. (64)
- Storage and handling services, consultancy, associations (22)
- Weighbridges, weighing systems (3)
- Loading dock and yard handling equipment (51)
- Logistics and freight transport (84)
- Wood and non-metallics working (79)
-
Metrology instruments and systems (3,891)
- Metrology instruments and systems (3)
- Gauging and Hand Tools for Inspection (159)
- Calibration Instruments (345)
- Non-contact, Optical, X-ray and Laser measurement systems (731)
- Coordinate measurement arms, systems and software (106)
- Surface, Profile and Topology systems (41)
- Measurement and Quality Software and SPC (1,026)
- Metrology standards room equipment (15)
- Production metrology, measuring equipment/systems, DROs (21)
- Coordinate measuring machines (CMM) and software (173)
- Thickness gauging and measurement (23)
- Measurement systems including encoders (261)
- Probes and sensors (332)
- Laser-based systems (49)
- Vision and scanning systems (362)
-
Testing and quality control systems and services (5,255)
- Testing and quality control systems and services (7)
- Electrical and Electronic Testing (904)
- Calibration and Testing Services, Consultancy and Learning (529)
- Materials Testing (2,654)
- Non Destructive Testing (222)
- Inspection and testing (non-metrology), NVH (228)
- Miscellaneous Instruments (140)
- Quality control systems/SPC software (108)
- Torque measurement devices and systems (125)
- Machine vision systems and accessories (321)
- Consultants and services: quality control, assurance (17)
-
Subcontracting services (1,264)
- Subcontracting services (1)
- General machining (208)
- Special purpose machining (47)
- Mould, die and tool making (101)
- Casting, die-casting and forging, hot and cold working (64)
- Sheet metal presswork, stamping and fabrication (187)
- Treatment and finishing (26)
- Electronics and electrical design and manufacture (199)
- Plastics and rubber moulding (100)
- Machine, plant rebuild, overhaul, upgrade and repair (21)
- General subcontracting services (66)
- Heat treatment (12)
- Sheet metals, plate, non-metals cutting and profiling (47)
- Fast prototyping and pattern making services (71)
- Plating and galvanising services (9)
- Machining and assembly (59)
- Gear making and gear systems and related services (7)
- Subcon Exhibition (39)
