Product category:
Enterprise Resource Planning software (ERP)
News Release from: Sescoi International | Subject: WorkPLAN ERP system
Edited by the Manufacturingtalk Editorial
Team on 09 November 2007
ERP increases plastics mould making
efficiency
ERP system has helped a maker of plastics moulding tools to increase efficiency as well as make significant reductions in its administrative workload.
Sescoi's WorkPLAN ERP system has significantly helped to increase efficiency and reduce administrative load at EsdaleTooling Based in Heckmondwike, West Yorkshire, UK, the company produces moulds for automotive parts, PET bottles for products such as detergent and mouthwash and a range of modular storage boxes which start at 200cc and go up to 84 litres
This article was originally published on Manufacturingtalk on 8 Jul 2008 at 8.00am (UK)
Related stories
WorkNC cuts machining times by up to 20%
Sescoi claimed that its latest NCspeed module can produce additional cycle time reductions of up to 20% through optimising machining cycle feedrates.
Mould maker has no crashes with WorkNC CAM
Mould and die maker said it does not have to worry about a crash with WorkNC CAM as it is very reliable and its performance is superior to other CAM systems it has used.
Currently, Esdale Tooling produces approximately 150 new tools each year as well as carrying out hundreds of repairs and modifications.
The company's previous ERP system was 12 years old and reaching the end of its useful life.
David Eastwood, technical manager said, in a report to manufacturingtalk.com: "We are always looking for new ways to improve our efficiency through using the latest technology.
Further reading
Toolmaker invests in Sescoi job management
Czech toolmaker evaluated several job management systems before selecting MyWorkPLAN from Sescoi, to exchange data and interface with external software packages such as CAD and Microsoft Office.
Sescoi CAM helps remove EDM problem
Specialist mould and die maker automates EDM, with help from Sescoi CAM software, to remove a production 'bottleneck' and increase capacity by at least 30%.
Sportswear maker uses CAM to machine skiboots
Sportswear maker produces about 200 molds per year and has set up a single machining sequence, to suit every ski boot design and to cut the ten different sizes available in each range.
When we saw WorkPLAN we could see that it would do exactly what we wanted, and more." WorkPLAN has been designed around the needs of the toolmaking industry, using Sescoi's 20 years of experience in this sector.
Starting with a quotation, WorkPLAN enables Esdale Tooling to use its skills to build up costs from historical information about how previous tools were made, using the rates for each task such as CAD/CAM, tool design, and gun drilling.
Additionally, where the work is a replacement, modification or repair, the complete history of the tool is stored in the system.
This enables the company to look back through design iterations, manufacturing methods, and component and material sources to offer full traceability.
This feature benefits Esdale Tooling and its customers.
Eastwood added, "Having this level of detailed information makes it possible for the quotations to be very accurate, allowing us to discuss elements of the tool and product design with our customers to reach an optimum solution for both cost and quality".
The changeover to WorkPLAN was completed in one step, once the cost centres and employee information had been set up.
Eastwood said, "The installation was not difficult thanks to the support we received from Sescoi.
Its service has been very good, implementing our special requests into the software and setting up reports to suit our company".
Once Esdale receives an order, WorkPLAN automatically transfers the information in the quotation to the works order.
The system also keeps track of stock, to ensure that it is used up before more parts and material are purchased, producing a positive impact on cash flow.
Having a schedule in WorkPLAN for the construction of the tool helps further, as mould plates are ordered at the general assembly drawing stage, while items like ejectors are only ordered as the tool gets to the fitting stage.
Esdale has ten WorkPLAN terminals around its offices and shop floor.
These allow employees to clock on to jobs, and managers to analyse the progress and costs so far.
Eastwood said, "Staff and resources are always logged on to a task.
We track machines and operators separately, as an operator may be working more than one machine.
This makes it possible to precisely allocate the costs to each job".
By using the terminals around the factory, WorkPLAN has created a paperless working environment with live reporting of events.
The system also keeps track of quality issues.
Eastwood added, "We save non conformance reports, and rectification notifications, which allows us to examine patterns of non conformance, find out what went wrong and take corrective action".
The reporting within WorkPLAN allows managers at Esdale to check the profitability of each tool as well as on time delivery performance, which has a direct impact on cash flow.
The software links to Sage, Esdale's accounting package, and produces documentation such as delivery notes, stock sheets and invoices which are all now amalgamated into WorkPLAN, greatly reducing administrative workload.
Eastwood concluded, "By simplifying and automating routine tasks, WorkPLAN enables staff to be redirected to more productive work.
Day to day administration has gone down dramatically and it would be very difficult to operate without it.".
• Sescoi International: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
