Product category:
Materials Testing
News Release from: Salter Brecknell | Subject: Dillon dynamometer range
Edited by the Manufacturingtalk Editorial
Team on 23 August 2006
Dillon dynamometer for measuring tensile
forces
New to the UK from Salter Brecknell is the Dillon dynamometer range for measuring tensile forces.
New to the UK from Salter Brecknell is the Dillon dynamometer range for measuring tensile forces Capacities range from 200kg to 50,000kg
This article was originally published on Manufacturingtalk on 28 Sep 2006 at 8.00am (UK)
Related stories
Dynamometers proof test chains, rigging
A dynamometer range for measuring tensile forces, with capacities ranging from 200kgf to 50,000kgf, is used for proof testing lifting and rigging gear and critical overhead lifting on cranes.
Hardness tester has large work volume
Bowers Metrology CV-600A analogue Rockwell hardness bench tester has a spacious working envelope to accommodate even the largest of test specimens.
Analyser checks plastics moisture content
The Computrac Moisture Analyser determines moisture in plastics with high accuracy with ease of operation, without having to use toxic reagents.
Dillon is the market-leading brand in the USA.
Applications for dynamometers include mounting cables for bridges, adjusting tension on overhead wires and guy wires, field-testing chain and wire rope, proof testing lifting and rigging gear and for critical overhead lifting applications on cranes.
Three ranges are being launched, the AP mechanical range and two digital ranges - ED Junior and EDxtreme.
All have a working overload capacity of 150% minimum and an ultimate safety factor ratio of up to five times capacity, i.e.forces of up to five times capacity can be applied before it breaks.
AP mechanical dynamometers are available in ten capacities ranging from 200 to 50,000 kg.
Each has a measurement accuracy of +/- 0.5% and a choice of a compact 125mm dial or a highly visible 250mm dial.
ED Junior and Ed xtreme digital dynamometers are portable units offering accuracy and repeatability to 0.2% of capacity or better.
Capacities range from 1000kg to 50,000 kg.
The 26mm high dot graphic display features a choice of measurement units including kg, lb and Newtons.
Both ED Junior and EDxtreme display live weight or peak hold for tension testing applications.
EDxtreme also has a sealed connector for serial communications.
This enables data to be extracted and printed directly from the dynamometer.
Alternatively EDxtreme can be radio equipped to communicate with a hand held readout.
The radio communicator has a range of up to 100 metres and can monitor up to four EDxtreme scales for load and total weight.
Comments Bob Cooper, Salter Brecknell's UK general manager: "Dillon dynamometers have a reputation for reliability and quality in the USA.
Applications are almost limitless as anything that involves applying tensile loading or strain can be measured using this equipment" Salter Brecknell is also introducing a repair and calibration service for dynamometers.
This covers proof loading and certification.
The company recommends that equipment is calibrated and tested annually.
• Salter Brecknell: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
