Product category:
Press shop and sheet metal working automation, slitting, shearing
News Release from: Shear-Form Machine Tools | Subject: Dimeco Alipresse power press tool transfer trolley
Edited by the Manufacturingtalk Editorial
Team on 29 April 2004
Low cost transfer trolley makes tool
changes safer
A low cost power press tool transfer trolley makes it very simple to remove press tooling and lock it onto the ball table so that there is no chance of the tooling moving during transfer.
A low cost power press tool transfer trolley from Dimeco Alipresse, that makes it very simple to remove press tooling by being easy to operate is available from Shear-Form Machine Tools, the Coventry based sheet metal and plate working machinery supplier and their sole representative in the United Kingdom It locks the tooling onto the ball table so that there is no chance of the tooling moving during transfer operations
This article was originally published on Manufacturingtalk on 26 Jun 2001 at 8.00am (UK)
Related stories
Bending machines produce long components
Shear-Form Machine Tools is the sole UK representative for Swiss metalworking equipment manufacturer Jorns AG, who has introduced a new series of bending machines.
Coil feeder NC system eliminates feeding loop
An exciting concept in flexible, NC, high speed coil feeding eliminates the need for any feeding loop from the coil so that the feeding line is only 4m long.
Designed with sheet metal fabricators in mind, it has a working area of 500mm x 660mm with a load capacity up to 1 tonne.
It is height adjustable to 1.35m, so that it can be used with any make of power press.
It is so simple to use that, all the operator has to do is pull the tooling from the press onto the ball table, then lock the tooling so that it cannot move using the one pump action handle, he then unlocks the trolley wheels and takes the tooling to wherever it is required.
Clive Meir, Director, Shear-Form Machines Tools said: "This is such a simple piece of equipment that it will make life for the press operator so much easier.
The ball table has two main functions firstly ease of transfer of the tooling and secondly the ability to lock the tooling through the design of the balls, both two critical safety features.
One sheet metal fabricator saw one in Dimeco's factory being used and ordered two there and then.
It is probably the lowest cost trolley available on the market." 1 1.
• Shear-Form Machine Tools: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
