Product category:
Deburring, de-flashing and fettling
News Release from: Shear-Form Machine Tools | Subject: ViBurr 2016EC vibratory deburring machine
Edited by the Manufacturingtalk Editorial
Team on 22 September 2004
Ultra-quiet deburrer replaces manual
tooling
Low cost, ultra quiet, portable and vibratory deburring machine is designed to replace hand held deburring tools and so avoid varying quality standards, high damage and unwanted reject rates.
Shear-Form Machine Tools, the Coventry based sheet metal and plate working machinery supplier and sole UK agent for Florida based, McKechnie International has introduced a new low cost, ultra quiet, portable and vibratory deburring machine ViBurr 2016EC The single phase 230v 50Hz ViBurr overcomes two major problems which occur with deburring in the workshop
This article was originally published on Manufacturingtalk on 26 Jun 2001 at 8.00am (UK)
Related stories
Bending machines produce long components
Shear-Form Machine Tools is the sole UK representative for Swiss metalworking equipment manufacturer Jorns AG, who has introduced a new series of bending machines.
Coil feeder NC system eliminates feeding loop
An exciting concept in flexible, NC, high speed coil feeding eliminates the need for any feeding loop from the coil so that the feeding line is only 4m long.
It has a 2mm thick steel casing providing a very durable piece of equipment and a sound proof lining which absorbs deburring noise levels to around 80 decibels.
It is designed to replace hand held deburring tools, which can result in varying quality standards, high damage and reject rates as well as high production costs per component.
It is small and compact (900mm high x 572mm wide x 686mmdeep) as well as being self contained.
It is also portable with hard wearing swivel casters.
It uses a 2700 rev/min vibratory eccentric shaft producing the same high energy action as larger equipment, whilst producing the same high quality finish to products.
It is able to handle a variety of metal finishing jobs, from coarse grinding to delicate polishing.
It can be used on steel tubing, pressings, stampings, castings, precision engineered products, gear wheels, scissors, cutting tools and a multitude of other products up to 450mm long for de-burring, burnishing, cleaning, descaling, polishing, degreasing and flash removal.
No particular training is required and it is very fast in deburring small to medium size parts, removing all sharp edges and burrs with a short cycle time of around 5 minutes.
A single phase 230V parts and media separator is also available as an extra.
This unit separates parts and media in 30 - 890 seconds with either 9.5mm, 16mm, 22.2mm, 38mm or 51mm wire mesh screen supplied.
• Shear-Form Machine Tools: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
