Product category:
Measurement and Quality Software and SPC
News Release from: Shear-Form Machine Tools | Subject: Haeger 824 OneTouch-3
Edited by the Manufacturingtalk Editorial
Team on 08 August 2006
Insertion press adjustable up to 72kN
The Haeger 824 OneTouch-3 insertion press has been completely re-designed for 2006 and is now available through Shear-Form Machine Tools.
The Haeger 824 OneTouch-3 insertion press has been completely re-designed for 2006 and is now available through Shear-Form Machine Tools, the Coventry based sheet metal and plate working machinery supplier and sole UK representative for California based insertion press manufacturer Haeger The 824 OneTouch-3 insertion press has a force range adjustable up to 72kN, a 610mm throat depth, 0-215mm adjustable stroke length and is capable of handling up to 1500 insertions per hour
This article was originally published on Manufacturingtalk on 2 May 2008 at 8.00am (UK)
Related stories
Insertion press has tool changing system
The Haeger 824 OneTouch-3 insertion press shown by Shear-Form at MACH 2008 recently has a four-station automatic tool changing system that performs a 3s automatic tool change.
Fastener insertion press works at 1500/h
An insertion press has a force range adjustable up to 72kN, a 610mm throat depth, 0-215mm adjustable stroke length and is capable of handling up to 1500 insertions/h.
It is economic to use as the hydraulic system uses approximately 40% less energy than air or air over other hydraulic methods.
It is also extremely accurate allowing the operator to apply full tonnage at any point in the stroke and is supplied as standard with 4 x Modular Autofeed Systems (MAS) New features include a servo-driven tool changer which has a 3 second automatic tool change, a new shuttle tooling platform providing 2-minute tooling set up for any fastener, new upper vacuum tip system with positive locking, new LED laser part locating light plus the latest release of Haegers InsertionLogic version 9 software.
The new 4-station automatic upper and lower tool changing system with servo-driven upper axis can be used with shuttle and shuttle-nut style tooling, It allows one-time handling of parts with multiple fasteners at the same time as acting as a secondary batch counter, so that the tools will not change until the required number of fasteners are inserted.
The new laser part locating light uses a 'red cross hair' laser locator to quickly and easily show the operator exactly where each fastener is inserted.
The InsertionLogic version 9 software with practically unlimited on-board program storage, InsertionGraphics (Patent pending) and optional quality control pack includes Networking Software Communications, off-line Programming and Digital Camera Package.
The networking feature gives the Operator simple communications between the OneTouch and a PC or network, enabling him/her to create and store programs off-line and call them up on multiple presses.
New Quality Assurance features are able to handle multiple types and sizes of fasteners during one part handling include the checking of the fastener length and its presence.
• Shear-Form Machine Tools: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
