Product category:
CNC water jet cutting and profiling machines
News Release from: Shear-Form Machine Tools | Subject: Retrofittable coil loading cars
Edited by the Manufacturingtalk Editorial
Team on 13 December 2006
Coil loading cars retrofit easily into
lines
Low cost, easy to install coil loading cars have been designed for easy retrofitting to most de-coilers found in coil processing lines.
A series of new, low cost, easy to install coil loading cars from the Rotobloc-PSP division of the Dimeco Groupe is available from Shear-Form Machine Tools, Coventry, the sole UK representative for the French coil processing equipment manufacturer These new coil cars CCM.3 (maximum load 3,000kg), 4 and 5 (maximum load 4,500kg) have been designed for easy retrofitting to most de-coilers found in coil processing lines and require only a minimum amount of floor space
This article was originally published on Manufacturingtalk on 26 Jun 2001 at 8.00am (UK)
Related stories
Bending machines produce long components
Shear-Form Machine Tools is the sole UK representative for Swiss metalworking equipment manufacturer Jorns AG, who has introduced a new series of bending machines.
They are very economical to use as they only require an air supply line to operate the lifting carriage to load coils with a maximum diameter of 1500mm and maximum width of 1500mm.
For narrow coils, four holding pins can be supplied as an option.
A small electric motor fitted to the end of the rails is used to move the carriage in and out.
They do not require any hydraulic link to the decoiler They operate on a set of two-rails, which are designed to fit under the feet of the decoiler.
The rails are bolted to the floor thereby reducing any tilting and de-railing to an absolute minimum.
All models have a very low height at bottom dead centre (BDP) of 315mm and the maximum lifting height is 500mm for loading and unloading of coils.
• Shear-Form Machine Tools: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
