Product category:
Materials Testing
News Release from: Systech Instruments | Subject: Process Gas Moisture Analyser Series 500
Edited by the Manufacturingtalk Editorial
Team on 19 December 2002
Process Gas Moisture Analyser Is
Versatile
The new Series 500 Moisture Analysers from Systech Instruments combine microprocessor control with a high quality phosphorus pentoxide electrolytic sensor.
The new Series 500 Moisture Analysers from Systech Instruments combine microprocessor control with a high quality phosphorus pentoxide electrolytic sensor to provide accurate and dependable measurement of absolute moisture content of all types of non-corrosive process gases in ppmv or dew point, C or F With autoranging from 0.01 to 1000 ppm, remote sensors, fault alarms, an auto calibration option and RS232/485 data interface, the Series 500 is versatile and simple to install and operate
This article was originally published on Manufacturingtalk on 5 Jul 2002 at 8.00am (UK)
Related stories
Automatic nitrogen control cuts soldering costs
Installing automatic control of the nitrogen atmosphere in a wave soldering plant has increased productivity of assembled printed circuit boards and reduce gas costs for wave soldering.
Analysers precisely check O2 penetration in film
Analysers are simple to use, modular systems for the precise analysis of the oxygen permeation performance of packaging film up to 1.27 mm thick.
Sensors can be mounted inside the analyser case or remotely and a wide range of types is available to meet the needs of most applications.
The general purpose phosphorus pentoxide sensor for remote installation, supplied with flow valves and wall mounting bracket, can be mounted up to 100 metres from the analyser and connected using a simple coaxial cable.
A thermal mass flow controller can be fitted to the internal sensor model to automatically maintain the correct flow rate for maximum accuracy.
This option also provides flow alarms to ensure that the instrument and flow system are always in the correct configuration.
For complete security, an autocalibrate check option allows the analyser to be connected to a supply of certified gas and programmed to check calibration automatically at regular intervals.
If the calibration moves outside preset limits, a warning is displayed and a fault alarm sounded.
Three versions of the Model 500 are available; panel or bench mount, NEMA 4X/IP66 water and weatherproof and 19 inch rack mount.
The 19 inch rack version can be combined with a Systech oxygen analyser in a standard 19 inch cabinet to create a dual gas unit.
Systech Instruments is one of the world's leading designers and manufacturers of gas analysis instrumentation and has agents and distributors in most major countries.
Systech gas analysis equipment is an essential part of the production process in many industries, including industrial gases, petrochemicals, pharmaceuticals, electronics and food, and is widely used by university and industrial research facilities.
• Systech Instruments: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
