Product category:
Electrical systems
News Release from: Sarel | Subject: Spacial 3D.ATEX steel enclosures
Edited by the Manufacturingtalk Editorial
Team on 02 June 2004
Steel enclosures offer 'double safety'
security
Spacial ATEX-approved steel enclosures offer a "double safety" for electrical installations in industries such as chemicals, refining and food processing.
With its new range of Spacial 3D.ATEX steel enclosures, SAREL now integrates in its offer a range of "double safety" enclosures conforming to the new ATEX European directive No 94/9/EC, applicable overall from 1 July 2003
This article was originally published on Manufacturingtalk on 2 Apr 2007 at 8.00am (UK)
Related stories
Junction boxes are IP55 rated without cable glands
The Mureva range of junction boxes from Sarel, a division of Schneider Electric, offers automatic IP55-rated sealing without the need for cable glands and rugged construction.
3D models of off-the-shelf telescopic slides
Telescopic ball bearing slide designer and manufacturer, Accuride International, has produced optimised 3D models of its 'off-the-shelf' products which can be downloaded via its website.
Full digital set-up on tension control system
A new digital tension controller is claimed to be one of the most comprehensive tension control systems currently available
This new measure has raised equipment safety levels, particularly of components in which category are included enclosures installed in explosive gas or dust-laden atmospheres.
Approved enclosures for severe applications - approved by the L.C.I.E laboratory under No.
02 ATEX 0037 U and conforming to standards EN 50014 and EN 50019, Spacial 3D.ATEX steel enclosures contribute to the safety of electrical installations in industries such as chemicals, refining and food processing.
Spacial 3D.ATEX enclosures carry double marking: new approach Ex II 2 G/D and additional marking EEX e II.
They are for use in installations for surface industries Group II, Zones 1, 21, 2 and 22.
Guaranteed "double safety" component - the Spacial 3D.ATEX steel enclosure is produced from a single, cross-folded steel sheet and has external mechanical impact resistance IK 10.
IP 66 degree of protection is assured by a polyurethane door seal, double thickness gutter shape front body profile and 3 door closure points.
External earthing is by crimped blind nut.
Four welded backstuds facilitate mounting of plain, silkscreened, microperforated, Telequick perforated or mixed chassis.
Four crimped blind nuts are provided for installation of wall fixing brackets from the exterior.
Range of 10 enclosure sizes to suit all uses The range of empty Spacial 3D.ATEX enclosures comprises 10 references, from 300x200x150 mm to 1000x800x300 mm.
• Sarel: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
