Product category:
Tool and cutter grinding
News Release from: Koerber Schleifring UK | Subject: Walter Helitronic Power CNC tool grinder
Edited by the Manufacturingtalk Editorial
Team on 25 January 2006
CNC tool grinder revolutionises tool
management
CNC tool grinder is at the heart of far-reaching changes in the way an UK aircraft equipment manufacturer supplies tooling to its extensive onsite production and manufacturing operations.
A Walter Helitronic Power CNC tool grinder is at the heart of far-reaching changes in the way Marshall Aerospace's Manufacturing Support Division supplies tooling to the company's extensive onsite production and manufacturing operations The investment in the five-axis machine - the Division's first CNC tool grinder - has been justified as being the core technology through its ability to enable the introduction of: * Standardised metric diameters and lengths for the complete manufacturing site to replace a myriad of tool types, styles and sizes
This article was originally published on Manufacturingtalk on 2 Aug 2006 at 8.00am (UK)
Related stories
Wheelchanger raises CNC tool grinding output
CNC tool grinding machine has a grinding wheel changer that extends the machine's capabilities for the automated, non-stop processing of complex tool forms or large batch work.
Twenty four grinding machines displayed at EMO
At the EMO 2005 the Schleifring Group exhibited 24 grinding machines including a Studer single-pur-pose centre grinding machine for grinding chamfers and full angles on carbide metal blanks.
* Small batch stock holding, to enable the Division to move away from grind-on-demand and towards supply-on-demand within drastically reduced lead times.
* Significant reductions in the amount and variety of tooling traditionally purchased as consignment stock from a variety of suppliers.
With 75 employees having a vast range of support skills embracing, for example, manufacturing engineering, programming, heat and protective treatment, as well as calibration and inspection, the Division supports a wide variety of manufacturing disciplines on Marshall Aerospace's sprawling site at Cambridge Airport - primarily metal machining/working but also plastics, assemblies and woodworking.
Further reading
CNC grinder improves pump case quality
Jan-Oliver Roehrl speaks to the Schleifring's 'Motion' magazine about the use of a CNC vertical spindle internal grinding machine at the Bosch plant in Czech Republic, to improve performance and produ
Compact grinding centre drills and mills too
Compact grinding center designed especially for the complete machining of relatively small parts features an automatic tool and wheel changer and can be used for drilling and milling tasks.
Grinding replaces broaching and milling
A cost-effective alternative - that replaces the broaching and milling with grinding - has been developed for the process used to manufacture a variety of steering gear racks.
In focusing on the cutter service, manufacturing support manager Kevin Patterson has made sweeping changes in response to the manufacturing operation's traditional wide-ranging, non-standardised tooling consumption programme, coupled with the company's continual trends towards using carbide cutters at increased spindle speeds, particularly for milling operations.
His response has been to replace six manual tool grinders that were dedicated to separate cutter types with a new CNC tooling cell based around the Walter Helitronic Power.
"Clearly, the cutter team was operating an ad-hoc grind-on-demand service - trying to meet the minute-to-minute demands of the hangar teams - and with such a wide variety of tooling in circulation throughout the site there was no real control over supply," he says.
"The introduction of a programme of standardised cutters (holders and shanks) throughout the site will ease that situation considerably, and by investing in the appropriate CNC tool grinder we will be able to make more of our own tooling.
Cutter supply will now be controlled by Kanbans that will trigger supply, grinding and purchasing of raw materials.
Grinding will be performed in batches, thereby reducing amortised unit times.
Standard cutters will be held as minimum stock enabling immediate supply or rapid modification to meet special requirements.
In addition, with the milling machines in particular working at higher spindle speeds, we obviously needed perfectly balanced cutters - hence the Walter machine." Patterson is adamant that the cutter team's new-found flexibility and versatility is exactly what is needed to reduce costs and improve the supply of tooling throughout the site - and, he says, these are the same qualities that made the Helitronic Power the machine of choice.
Available from Koerber Schleifring UK of Honiley, near Kenilworth, the Helitronic Power offers 11.5kW of power and rapid traverse rates of 15m/min in all linear axes plus 120 deg/sec on the rotational axes.
The machine can accommodate tools up to 350mm long (300mm for face grinding) and 320mm diameter.
The machine has effectively created a sea of change in the Division's tooling supply, with the cell also equipped with Walter-supplied programming to cover all eventualities, as well as PC-based stock control/ordering and complemented by dedicated equipment and tool storage cabinets within the same cell.
Armed with this technology, the team is already employing grinding procedures that are leading to extended tool life, in one instance by changing the flute runout forms and surface finishes on sheet metalworking cutters thereby making them less susceptible to breaking at higher feed rates.
Kevin Patterson says this is just the start of things to come.
• Koerber Schleifring UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
