Product category:
Abrasive machining - manual and CNC machines
News Release from: 600 Centre | Subject: Okamoto ACC 63ST surface grinder
Edited by the Manufacturingtalk Editorial
Team on 30 April 2004
CNC surface grinder improved
competitiveness
Having failed a year ago to win a major order, precision grinding specialist improved production efficiency through a CNC surface grinder and this time, won the contract.
Having tendered for a major contract a year or so ago and failed to win the order, precision grinding specialist Bosworth Tools decided it was time to improve its production efficiency And as a result, when it got another chance to quote for the same job with a new Okamoto IGM 15NC internal grinding machine and an Okamoto ACC 63ST surface grinder supplied by the 600 Centre of Shepshed near Loughborough installed, the Hinckley-based sub-contractor won the day
This article was originally published on Manufacturingtalk on 22 May 2001 at 8.00am (UK)
Related stories
Robodrill produces savings within three months
Within three months of installation a Fanuc Robodrill, Raytheon Marine Company based in Portsmouth calculated savings of GBP6,000 on components it produced due to faster set ups.
Wire EDM machine uprated to cut quicker
Fanuc has extended the capacity, specification and performance of its Robocut Alpha-1iA wire cut electro discharge machine (EDM) to provide high accuracy performance cutting at up to 300mm2/min.
According to managing director, Mike Fawcett, not only did these new machines help to boost production efficiency and reduce cycle times by 40 per cent on its wear sleeve component contract, the company's new found repeatability and consistency of production had such an effect on operational standards that it became a major influence on the business.
Bosworth Tools uses both Okamoto machines to finish grind the 63.5mm diameter by 31.75mm long 60 HRC steel wear sleeves.
The components feature a 53.97mm through bore and a 10 micron toleranced recessed section on the front end that originally caused so much disappointment in losing the original order.
Further reading
VMC has high positioning accuracy
Weighing in at over four tonnes and fitted with generous hardened and ground slideways, the Bridgeport VMC 1000 vertical machining centre has a high positioning accuracy of five microns.
Well-priced hydraulic table surface grinder
A new competitively priced hydraulically operated table surface grinding machine developed by Okamoto, the world's largest grinding machine manufacturer, incorporates AC servo control
Productivity Partnerships Exhibition announced
The seventh Productivity Partnerships Exhibition brings together an unrivalled display of the advantages and application of the latest manufacturing technologies between 10-12 October
The IGM 15NC internal machine now grinds four features of the sleeve which includes the main bore, recess and two faces in a single chucking operation, while the ACC surface grinder finishes a top flat face.
A cylindrical grinder is then used to finish grind the outside diameter.
Previously, when Bosworth quoted for the job and made some sample parts, it used its conventional grinding machines which were capable of automatic cycle.
However, these machines required five operations and took around 10 minutes grinding time to produce a part.
But now the Okamoto machines are able to reduce the grinding time by some four minutes a part and with 200 sleeves required each week, this stacks up to a considerable saving in production lead time.
As well as reducing machining time, the new Okamoto internal grinder has enabled other improvements to this contract, as Fawcett explained: "The overall quality and accuracy of wear sleeves has been significantly improved and especially the maintenance of the 10 micron tolerance of the recessed section which is now a simple process to achieve.
Previous methods meant it was really difficult to hold tolerances on this feature but the IGM has made the complete recessing operation a success due to its inherent accuracy and combined programmable automatic wheel dressing routines.
In fact, after we delivered the very first batch of sleeves, produced by the new method, the customer came straight back saying the parts were perfect." Set up in 1974, Bosworth Tools originally produced and reground cutting tools.
However, when Fawcett, joined in 1978, the emphasis was changed to providing a subcontract grinding service.
The company purchased its first Okamoto microprocessor controlled internal grinder in 1988 and added a second identical machine within 12 months.
Over the following years, the emphasis changed to providing internal, external and centreless grinding capacity resulting in the six-people company now having nine grinding machines installed in its 3,500ft2 factory.
Components such as pins, spindles, sleeves and bushes are regularly produced for industry sectors such as: off-road vehicles, bearings, steel mills, aerospace and for leisure equipment in batches as small as 50 parts.
The Okamoto IGM 15NC has a 20,000 rev/min spindle, 4kW main drive and has a swing of 254mm.
It can handle internal diameters ranging from 6mm to 152mm and has a grinding stroke of 127mm.
Controlled by a two-axis Fanuc 18T CNC system, it has a very easy-to-use conversational programming system which Bosworth Tools has put to good use over its wide range of ground components.
While predominantly used on the wear sleeve contract, the IGM 15NC has also enabled Bosworth Tools to improve machining efficiency on other projects such as the grinding of a tractor transmission component which looked rather like a brake drum with a central multi-diameter boss and a hollow spigot.
Previously ground involving five separate operations on the microprocessor controlled Okamoto internal machine, this 203mm diameter by 50mm wide steel component, with an 89mm diameter central boss and a 50mm stepped bore, needed two operators for one of the operations with one permanently required for inspection duties.
The company then purchased an older technology CNC machine and was able to produce the part in a single chucking with one operator.
But with the latest Okamoto CNC machine the cycle is reduced considerably and the quality and ease of production described by Fawcett as being "infinitely better!" When considering the purchase of another internal grinding machine for both the wear sleeve and tractor transmission parts, Bosworth Tools initially thought to buy another second-hand CNC machine due to the higher cost of the latest Okamoto model.
However, the company had trouble tracking down a suitable machine and eventually contacted the 600 Centre to see if it could help locate one that was used.
This led to a demonstration of the IGM 15NC, which was put through its paces at the 600 Centre's showroom in Shepshed, when Bosworth's were surprised over what could be achieved with the latest developments and what it could get in improved production for its investment in a new machine.
This also led to a casual interest in the Okamoto ACC surface grinder which was installed in the showroom and following detailed discussions, Fawcett was able to negotiate a package for both, resulting in their installation at Bosworth Tools' works on the Sketchley Lane Industrial Estate in February 2003.
"The IGM 15NC is an unbelievably accurate machine," added Fawcett.
"It's so easy to program using the conversational system and we consistently produce high precision parts very easily without too much attention to the process once it is set.
We also like the automatic in-cycle dressing feature which has enabled us to fine tune and optimise the operational cycle on the 60 HRC wear sleeves where the 50mm outside by 25mm long aluminium oxide wheel has to be dressed four times in each component grinding cycle.
As well as enabling us to secure this major contract, the Okamoto has significantly improved our ability to offer higher quality internal grinding capacity on a sub-contract basis," he concluded.
• 600 Centre: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
