Product category:
Vertical machining centres (VMC)
News Release from: 600 Centre | Subject: Fanuc F-Series VMC - Protocon
Edited by the Manufacturingtalk Editorial
Team on 22 January 2008
Vertical machining centres precisely cut
Inconel
Latest high speed vertical machining centre used by an aerospace subcontract machining firm is maintaining 5 micron accuracy in the complex machining of Inconel components.
The first UK installation of the latest high speed Fanuc F-Series vertical machining centres (VMC) with 24,000 rev/min spindle, 54m/min rapid traverse rates and 1.6s chip-to-chip toolchange has gone directly into production of Airbus and Boeing aerospace components at Protocon Engineering The T21iF machine joins three existing Fanuc machining centres and a Fanuc wire EDM - also supplied by 600 Centre of Shepshed near Loughborough - that will significantly help to satisfy a rapidly rising order book at the 18-employee Southend-on-Sea (Essex) specialist sub-contract machinist
This article was originally published on Manufacturingtalk on 22 May 2001 at 8.00am (UK)
Related stories
Robodrill produces savings within three months
Within three months of installation a Fanuc Robodrill, Raytheon Marine Company based in Portsmouth calculated savings of GBP6,000 on components it produced due to faster set ups.
Wire EDM machine uprated to cut quicker
Fanuc has extended the capacity, specification and performance of its Robocut Alpha-1iA wire cut electro discharge machine (EDM) to provide high accuracy performance cutting at up to 300mm2/min.
Experiences of high reliability, a fast cycling ability and a means of providing consistent quality were the motivators for Matthew Smith and father, managing director Geoff Smith, to install the latest Fanuc VMC - based on their in-depth experiences over 15 years with the Fanuc machine range.
Matthew Smith, director of the family-owned GBP 1.1 million turnover business, said: "We are enjoying the highest order book ever in our 43-year history - and we are still being asked by customers to increase production further and provide shorter deliveries as well as tool up for new contracts.
This is where the Fanuc machines are playing such a critical role".
Further reading
VMC has high positioning accuracy
Weighing in at over four tonnes and fitted with generous hardened and ground slideways, the Bridgeport VMC 1000 vertical machining centre has a high positioning accuracy of five microns.
Well-priced hydraulic table surface grinder
A new competitively priced hydraulically operated table surface grinding machine developed by Okamoto, the world's largest grinding machine manufacturer, incorporates AC servo control
Productivity Partnerships Exhibition announced
The seventh Productivity Partnerships Exhibition brings together an unrivalled display of the advantages and application of the latest manufacturing technologies between 10-12 October
He said that Protocon's customers in the medical, MoD (UK Ministry of Defence) and motorsport sectors all seem to be busier than ever and are putting more work to subcontract companies able to provide the appropriate levels of service and quality.
Smith added that the company would have been under considerable pressure if it had not invested in the right equipment to produce the type of work being asked for.
Protocon Engineering was founded by Smith's grandfather in 1964 as a prototype machinist.
It moved into pre-production work to offer turning, milling and drilling service using a very early Fanuc Drill Mate from 600 Group.
The Drill Mate's reputation of being a 'workhorse' led Protocon to install a Fanuc Robodrill T10A through 600 Centre, which was eventually traded-in for a much improved performance Fanuc T14iB VMC.
Over the last few years, two further Fanuc T21iD VMCs have been installed alongside the T14.
The idea was to establish a bank of machining centres characterised by quick cycling as well as common setting, tooling, programming and operation.
It is this machine bank that the Fanuc T21iF has joined.
With a total of 18 CNC machines in the 5,000ft2 premises Smith said that he always checks out competitor specifications and prices.
He added that he had had such a positive feedback from the Fanuc installations that it would take a major discrepancy to direct Protocon to another supplier.
He said: "The on-going support received from 600 Centre also makes us reluctant to change our source for milling and drilling capacity".
A Fanuc Alpha O wire EDM was installed some seven years ago - this, too, has given sterling service, said Protocon, and is largely used in unmanned mode for toolmaking, prototype and production machining.
* Aircraft machining contracts - Protocon has gained civil and military aerospace contracts including a wide range of small components for Airbus A320 and A380, Boeing 777 and C17, Typhoon and F22.
In the past, the company has also supplied Nimrod, Jaguar and Tornado plus several helicopter projects.
Typical components include items for fuel management, power generation, fly-by-wire control, relays and actuators.
Such components demand strict attention to tolerance, geometry and surface finish, and they reflect Geoff Smith's 'roots' as an apprentice in an aerospace systems company.
With the use of the Fanuc VMCs and wire EDM for toolmaking, prototype and spares production, as well as batch work, the business effectively has many capabilities.
As Matthew Smith said: "Our ability to provide a wider spread of machining services also helps us to gain other work and has contributed to the doubling of turnover in the last six years." This prototype-to-production capability has also led the business into the medical sector for components used in drug testing devices, computerised medical trolleys, fibroscopes and endoscopes as well as parts for the MoD and motorsport - thus reducing risk and total dependence on one sector.
With such a background, a wide spread of ferrous and non-ferrous materials - including aluminium, various alloys and stainless steels, titanium, brass, copper, nylon, phosphor bronze, nickel iron and nickel silver as well as the occasional difficult to machine Inconel, are machined.
Batches range from 50 to a more consistent supply run of over 1,100 parts a week passing through the Fanuc machines.
* Machining Inconel - Matthew Smith described the recent machining of a part from a solid Inconel billet that was extremely complex involving very detailed milling and drilling.
He said: "The material was very difficult," and certainly brought all our toolroom skills into the production equation.
We were not hogging out material, rather it was a delicate process involving small tools but here the Fanuc T21iF was able to maintain the 5 micron tolerance on one particular feature right across the batch".
* About the Fanuc T21iF - the latest Fanuc T21iF was launched in Europe during September at the EMO 2007 exhibition in Germany.
The VMC has a working volume of 500mm X by 300mm in Y and 330mm in Z.
It incorporates thermal displacement compensation in each axis to provide the advantage of an enhanced repeatability and accuracy over long periods of production.
A high speed 24,000 rev/min spindle provides Protocon with the capability to increase feed rates above the D-Series machines and effectively use small milling cutters and drills to advantage on the typical fine detail demanded by many of the parts produced.
The new machine is already proving to be more productive than its three Fanuc counterparts.
It has 54m/min rapid traverse rates reached with an acceleration of 1.5G.
When this high speed positioning capability is coupled with a 1.6s cut-to-cut tool exchange that is some 11% faster than the D-Series machines, very competitive cycle times are produced.
Matthew Smith said: "Once we start downloading programs that have been used on the other machines for repeat orders, we expect to achieve quite significant savings on cycle times and especially reap benefit from the new processor in the Fanuc Series 31i-A5 control system".
The ability to switch programs and tooling between the VMCs is important to Protocon because it leaves the GibbsCAM offline programming system to be used on new work in support of the Fanucs and other CNC lathes in use.
* EDM work - the Fanuc wire EDM is always programmed at the control due to the ease of the system in its role in producing an aerospace component such as a stainless steel fuel pump impeller, with up to eight vanes that are machined from solid.
The multiple part fixture is loaded with 10 pre-turned blanks and the machine, which has just been rejuvenated by a GBP 10,000 upgrade by 600 Centre.
The EDM is set to run in the late afternoon with the parts completed overnight ready for unloading the following morning.
Each of the 10 parts is secured in the fixture by a central Allen screw, and eight screws to retain each segment as it is cut from the blank.
Stainless steel valve plates are also machined in the same way except that two stacks of 25 parts are loaded to the fixture giving a totally unmanned production overnight of 50 parts.
One particular component for a Boeing fuel system is initially turned then milled on the Fanuc T21iD to produce two cut out sections and a slot in the wall of the cylindrical part from which a highly accurate internal cam form is wire cut.
Once again, autocycling of both the VMC and wire EDM leads to very cost-effective production and ensures the precision demands of this critical component are maintained, said 600 Centre.
Currently they are run through 11h days over a six day week but with the continued influx of work, another shift could be instigated to give total around-the-clock production while requiring limited supervisory attendance.
• 600 Centre: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
