Product category:
Bearings and guideways - rotary and linear
News Release from: SKF UK | Subject: Magnetic bearings
Edited by the Manufacturingtalk Editorial
Team on 07 October 2004
Power generation gets magnetic support
SKF has provided magnetic bearing technology that supports the rotating parts of a new 1.2MW high-speed generator.
Coupled to an industrial gas turbine, the generator is part of a system designed and built by Turbo Genset, a UK company specialising in innovative high-speed machines used to produce electrical energy It offers a 50 to 60% reduction in size compared to traditional low-speed systems of the same power rating and can consume natural gas or a variety of other fuels
This article was originally published on Manufacturingtalk on 19 Apr 2004 at 8.00am (UK)
Related stories
Gearbox design smashes engineering barriers
Considered a breakthrough in the world of industrial transmissions, a gearbox offers a service life of greater than 50,000 hours - 30,000 more than the industry average.
Packaging improvement prevents bearing damage
A versatile, robust and environmentally friendly packaging solution for the transportation of large-size bearings affords easier and safer handling and superior protection.
The SKF magnetic bearings offer many attractive features.
These include oil-free operation, no wearing components, virtually maintenance free, vibration free operation, advanced and low energy consumption.
Magnetic bearings are now suitable for a wider usage thanks to new developments that have seen a reduction in size of the control systems and an increase in their performance.
Further reading
Giving angular contact ball bearings longer life
By modifying the geometry of the raceways and changing the manufacturing process, the axial load carrying capacity of angular contact ball bearings has been increased and lifespans extended.
Vital link given in clip chain refurbishment
In the plastics and textile industries, the maintenance of clip chains is a major production uptime consideration, so a specialist refurbishment service has been set up.
A magnetic bearing system has three main elements: a bearing stator and rotor to apply electro magnetic forces to levitate the shaft; position sensors to identify the position of the shaft in five axes; and a controller and control algorithms to keep the shaft at a pre-defined position.
The magnetic bearing stator comprises a stack of laminations with copper coils wound around it to form a series of poles.
A current is supplied to each coil to produce an attractive force that levitates the shaft inside the bearing.
The controller controls the current applied to the coils by monitoring the position signal from the positioning sensors in order to keep the shaft at the desired position throughout the operating range of the machine.
Usually there is 0.5 to 2mm air gap between the rotor and stator depending on the application.
The shaft is typically driven by another source such as a turbine or engine; alternatively, a motor is integrated to the shaft design to drive the shaft.
Distributed power systems have a wide potential in industrial, commercial, mobile and remote applications such as manufacturing sites, housing complexes, hospitals, shopping malls, entertainment centres, small communities, leisure facilities and offshore facilities.
They can be installed to supplement grid-delivered electricity in periods of high demand or grid breakdowns.
With the world demand for energy expected to continue to increase strongly in the future, and large-scale deregulation of electrical power markets, such systems are expected to become preferred choices for many providers.
The 1.2MW system from Turbo Genset is due for market launch in quarter two 2005, after field trials currently taking place in combined heat and power applications. Request a free brochure from SKF UK ...
• SKF UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
