Product category:
Actuators, motion systems, etc
News Release from: SKF UK | Subject: Jaeger MD3 and MD4
Edited by the Manufacturingtalk Editorial
Team on 12 October 2006
Actuators from enable motion in tight
spaces
Compact actuators enable motion in tight spaces are available with maximum push force ratings from 1,000N to 3,000N, and with stroke lengths from 100mm to 400mm.
The latest compact Jaeger MD3 and MD4 linear actuators from SKF, the leading knowledge engineering company, offer versatile solutions in a wide range of applications where space is limited, including rehabilitation equipment for the healthcare sector, automatic door and window openers in the building industry, and automation systems in the industrial sector The MD3 and MD4 actuators are available with maximum push force ratings from 1,000N to 3,000N, and with stroke lengths from 100mm to 400mm
This article was originally published on Manufacturingtalk on 18 Jan 2007 at 8.00am (UK)
Related stories
Compact actuators enable motion in tight spaces
The latest compact Jaeger MD3 and MD4 linear actuators from SKF offer versatile solutions in a wide range of applications where space is limited
Gearbox design smashes engineering barriers
Considered a breakthrough in the world of industrial transmissions, a gearbox offers a service life of greater than 50,000 hours - 30,000 more than the industry average.
Packaging improvement prevents bearing damage
A versatile, robust and environmentally friendly packaging solution for the transportation of large-size bearings affords easier and safer handling and superior protection.
The overall length of the standard actuator is just 160mm more than the stroke length, allowing the units to be accommodated easily even where mounting space is restricted.
Both versions can optionally be fitted with a safety nut, which provides limited push force even if the main drive nut is damaged.
This is a particularly useful feature in healthcare applications where it ensures that, even if a failure occurs, equipment can be safely returned to its rest position.
As an additional safety feature, MD3 and MD4 actuators can also be supplied with self-locking brakes.
Operating speeds of up to 20mm/s are possible, depending on the model and load, with units rated at 1,000N when working at full load.
Exceptionally quiet in operation, Jaeger MD3 and MD4 actuators from SKF have a duty cycle rating of 10%, equivalent to 6 minutes per hour, in continuous use.
They have an operating temperature range of +5C to +40C, making them suitable for use in particularly aggressive environments, and comply fully with the requirements of the EN 60601-1 standard, which covers electrical equipment for use in medical applications.
The MD3 and MD4 actuators are fully compatible with Jaeger CB200, CB300 and CB800 single- and multi-channel controllers, which can be used in conjunction with simple and convenient one- and two-key handsets.
The actuators are available in versions suitable for operation from 12V or 24V DC supplies, and the MD4 actuators include integral limit switches, while the MD3 versions have mechanical end stops. Request a free brochure from SKF UK ...
• SKF UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
