Product category:
Lubrication - lubricants and lubrication systems
News Release from: Shell Lubricants | Subject: Water in gear oils - prevention
Edited by the Manufacturingtalk Editorial
Team on 29 November 2006
Water in gear oil is bad news for
bearings
Just 1% of water in an industrial gear oil can reduce bearing life by up to 90%, which can increase component costs and potential unscheduled downtime, explains Joe O'Connor.
Just 1% of water in an industrial gear oil can reduce bearing life by up to 90%, which can have significant cost implications in terms of both component costs and potential unscheduled downtime While awareness of the problems that water contamination can cause is strong, operators are often surprised to learn how quickly contamination can escalate and the level of damage that can be caused by just a small amount
This article was originally published on Manufacturingtalk on 10 Sep 2007 at 8.00am (UK)
Related stories
UV light device detects oil leaks
A portable, easy to use UV light source helps operators find oil leaks and identify their location to help to improve process, reliability, safety and food safety.
Synthetic grease reduces bearing down-time
A combination of the latest technology thickeners, high quality additives and base stock oil has produced a synthtic grease to give better bearing service life and resistance to 'heat soak'.
Separation issues - since water is an inherent part of many production processes, removing the potential for contamination is simply not practical.
However, it is possible to manage the contamination issue to help prevent it from becoming a serious problem.
Good maintenance practice and the careful selection of a gear oil that quickly separates from water is by far the most effective way of reducing the risk of serious component failure and unscheduled downtime caused by water contamination.
Further reading
High quality air compressor oils added
The Corena range of high quality air compressor oils is being revitalised by Shell with the introduction of two new products.
Advanced lubricants help in cold conditions
Shell Lubricants has highlighted the dramatic changes in engines over the last two decades, and the increased pressure this has placed on the choice of oil.
High quality air compressor lubricant oils
Shell lubricants is revitalising its Corena range of high quality air compressor oils with the introduction of two new products.
Because we work closely with OEMs and our customers across a wide range of industrial sectors, the Shell Lubricants teams understand the need to prolong gear oil life and reduce operational downtime to enable operators to maintain production.
Our R and D investment means that we now have a wide range of gear oils specifically designed to meet the needs of industry.
A gear oil with improved water separation properties not only allows faster and easier water draining, but also lessens the frequency of oil changes.
As a result, the operator can benefit both operationally and financially from reduced downtime and lower oil consumption.
* Cause and effect - in the 'real world', protecting gears from water contamination completely is often a losing battle for operators; exposure to the elements, cleaning practices, leaking heat exchangers, process water and condensation resulting from variable operating temperatures can all be contributory factors to water contamination.
There are process improvements that can be made, but the risk factors need to be identified first and any changes in production process may come at an inevitable cost, from either capital outlay or implementation - or both.
Joe comments: "The important thing is to identify potential contamination points as early as possible and take steps both to rectify the risk factors and counteract the effects of the problem.
In short, the most effective strategy is to combine measures to prevent water entering the system with measures that limit the water's capacity for damaging components.
Even the most vigilant maintenance team may not be aware that there is a serious water contamination problem until, for example, corrosion and fatigue failure has started to occur.
Symptoms are often slow to emerge, and by the time pitting and surface wear begin to appear, components may already need urgent replacement, requiring downtime and potentially a disruption in production.
Vibration analysis and oil condition monitoring can help to act as an early warning system, and this should form part of an effective lubrication management programme.
These, however, are simply a valuable indicator that problems may be occurring, not a preventative measure.
One important way to help minimize the potential for water damage within the system is to choose a lubricant designed to maintain its performance even when small amounts of water enter the system.
* The secrets of specification - protection from water contamination is just one of many factors that should be considered when specifying the best gear oil for an application, and it should be just one of the performance benefits a high quality lubricant offers.
Choosing a gear oil formulated with a high quality base oil and designed to maintain its high performance in tough operating environments simply makes sound financial sense.
Shell Lubricants have revitalized their range of mineral and synthetic industrial gear oils to meet the demands of modern machinery.
Shell Omala, Shell Omala HD and Shell Tivela S gear oils, have been specially formulated to help limit the dangers of water contamination, prolong gear life and reduce unscheduled downtime, which can help industrial companies reduce their overall operating costs.
As a global leader in finished lubricants, Shell has over 60 years of expertise in the gear oil market.
Ongoing liaison, testing and research in close association with world-leading gear OEMs, and in compliance with all major international quality standards, including DIN, AGMA and US Steel, means that the Shell industrial gear oil range will continue to 'keep gears in motion' for many years to come.
* About the author - Joe O'Connor is a product application specialist with the Shell lubricants companies. Request a free brochure from Shell Lubricants ...
• Shell Lubricants: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
