Product category:
Pneumatic equipment
News Release from: SMC Pneumatics (UK) | Subject: Solenoid valves SV1000, 2000, 3000, and 4000
Edited by the Manufacturingtalk Editorial
Team on 12 April 2002
Solenoid valves speed up valve island
changes
Compact solenoid valves have been designed to provide fast and simple reconfiguration of valve islands eliminate the need for internal manifold wiring.
SMC's new compact solenoid valves, series SV1000, 2000, 3000, and 4000, have been designed to provide fast and simple reconfiguration of valve islands Giving the ultimate in flexibility the incorporation of multi-pin connectors within the porting block slices eliminates the need for internal manifold wiring
This article was originally published on Manufacturingtalk on 10 May 2001 at 8.00am (UK)
Related stories
Free mount pneumatic cylinder series launched
SMC Pneumatics has announced the launch of a new range of mini-free mount cylinder, series CUJ. The new CUJ series is ideal for those seeking space saving actuators.
End lock cylinders prevent piston rod drop
Two new introductions to SMC's range of End Lock Cylinders are designated CBG1 and CBQ2 and incorporate a locking mechanism, which prevents piston rod drop,
Sequentially assigned connector pins ensure that stations can be added, or subtracted, at the release of levers and the loosening of two screws (DIN rail mounting type).
For larger flow rates the SV3000 and 4000 provide a tie rod manifold solution.
Within series SV1000 and 2000, dual 3 port valves built into a single valve body, allow 4 position functionality, ie the output ports of a valve can be individually controlled.
With a mix of mounting conventional 5 port valves also being possible.
Having a power consumption of just 0.6W (current: 25mA, 24VDC) and a service life of 50 million cycles* or more, this valve range is ideal for the most arduous applications.
For environments where protection from dust or moisture is a consideration, valve islands having protection to IP65** and IP67** are available.
In addition, Gateway-type serial transmission systems compatible with this range of valves are also launched, these are designated EX500 and EX250.
The EX500 has 128 I/O (64 inputs and 64 outputs) and will control up to four separate manifold junctions with 32 I/O (16 in, 16 out) per junction, with a single cable from the gateway.
This provides both signal and power for each junction, eliminating the need for separate power connections and overcomes the problem of miswiring.
The EX500 series has an IP65** rating, which allows use in environments where there is direct contact with water, etc (based on IEC529).
Unused connectors are protected with waterproof caps.
The EX250 has 64 I/O (32 inputs and 32 outputs) and operates on a manifold, which with double solenoids allows up to 16 stations (up to 32 solenoids).
*Based on SMC life test conditions.
** Based on IEC529.
Not all connectors available meet these standards.
• SMC Pneumatics (UK): contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
