Product category:
Pneumatic equipment
News Release from: SMC Pneumatics (UK) | Subject: MHF2 compact air gripper
Edited by the Manufacturingtalk Editorial
Team on 25 September 2002
Compact air gripper has no end play
A new compact air gripper has been designed to improve dynamic behaviour by eliminating end play.
A new compact air gripper, launched by SMC Pneumatics, has been designed to improve dynamic behaviour by eliminating end play This is particularly important in pick and place applications, especially in the electronics field, where small, delicate parts are being handled, as is the low head height, which is reduced by a third, in comparison to similar products, with comparable holding force
This article was originally published on Manufacturingtalk on 25 Apr 2006 at 8.00am (UK)
Related stories
2- and 3-port solenoid valves take high pressure
Two and three port, pilot operated, solenoid valves, with high pressure performance answer process industry and PET machine builder's requests for use with air or inert gas.
Designated series MHF2, the grippers give the user the option of selectable strokes from 8mm to 80mm, together with low profile design, and a reduction in bending moments and vibration.
In addition, the compact design, strong holding force, (19 - 141N at 5 bar, with closing stroke at 20mm to 80mm), smooth movement and high rigidity are achieved by the use of linear guides and the double piston construction.
A choice of piping ports is available (axial or lateral) to ensure flexibility when installing the gripper to it's mounting plate.
Other technical specifications include: - * Bore sizes from 8 to 20mm.
* Action: double acting.
* Ambient fluid temperature 10 to 60degC (but not freezing).
* Repeatability: +/-0.05mm...
* Weight: 65 up to 1,225g, depending upon model specified.
* Autoswitch capability magnet built-in.
• SMC Pneumatics (UK): contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
