Product category:
Dispensing, filling and weighing systems
News Release from: Sensor Techniques | Subject: Washer test rigs
Edited by the Manufacturingtalk Editorial
Team on 24 October 2006
Special windscreen washer test rigs
Sensor Techniques is playing a small yet vital role in special windscreen washer test rigs designed and built by Quadratec.
Equipment supplied by leading force measurement specialists Sensor Techniques is playing a small yet vital role in special windscreen washer test rigs designed and built by Quadratec Monmouthshire based Quadratec is an advanced technology company involved in the design, development and manufacture of engineering products, instrumentation, machines and test equipment
This article was originally published on Manufacturingtalk on 15 Jun 2006 at 8.00am (UK)
Related stories
Precision weight amplifier calibrates large silos
Versatile, high precision weight amplifier offers cost-effective and effortless calibration for large silos and vessels, without the need for having to use calibration weights or flow meters.
Module suits manual, semi-automatic filling
A flexible filling module is specifically designed for controlling a diverse range of manual and semi-automatic filling applications where two speed component filling is typically required.
The washer rigs are designed so that manufacturers can align and pressure test their washer jet arrangements prior to supply to the vehicle manufacturers.
This pre-installation quality check saves valuable time on the assembly line and ensures batches are not rejected because of a small number of failed products.
Sensor Techniques have a long standing working relationship with Quadratec and have become accustomed to providing innovative solutions.
Further reading
ATEX certified digital weight display amplifier
Leading weight instrumentation specialists Sensor Techniques has introduced its DAS72-EX safe area amplifier, specifically designed for use with the ATEX certified digital weight display.
Fill 'er up please
Leading weighing and process control specialists Sensor Techniques are introducing their flexible DAS-72 filling module
The equipment supplied for each rig comprises a fully weld-sealed stainless steel beam load cell, mounting assembly and LAC-74 analogue amplifier.
Units are calibrated prior to installation and then finally adjusted in situ.
The LAC-74, which has excellent linearity and temperature stability over a range from -10 to +40C, is ideally suited for such low operating range applications.
During the test, which takes only a matter of seconds, the washers are clipped into a holder in the rig and then actuated via a foot operated switch.
When correctly aligned, the water jets should pass through a small round hole in a plate located at a predetermined distance from the jets.
After the water has passed through the hole it impacts on the vertical stainless steel plate attached to the load cell, itself mounted in the vertical plane.
The actual force to be measured is less than 0.1 newtons and the low level signal from the load cell is amplified and transmitted as a standard 0-10 V signal to the PLC controlling the rig.
If the measured force is too low the unit is rejected.
As Quadratec's managing director Mark Thatcher concludes: "This application posed two tricky problems for Sensor Techniques.
Not only are the forces involved very low, but the environment is particularly hostile with high levels of humidity and water.
Most low capacity force transducers are not fully sealed so they had to provide special products that met both challenges.
The load cells have a capacity of only 25 newtons yet are fully weld sealed.
Throughout the design and development of the equipment Sensor Techniques have provided excellent support and advice.".
• Sensor Techniques: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
