Product category:
Press tools - design, manufacture and usage, CAD/CAM, software
News Release from: StampingSimulation.com | Subject: On-line press tool/stamping tool simulation
Edited by the Manufacturingtalk Editorial
Team on 22 August 2006
Web site offers stamping simulation for
SMEs
StampingSimulation.com is enabling small press/stamping tool makers to compete and win large contracts from multinationals, by providing affordable access to advanced simulation technologies.
StampingSimulation.com would like to answer a question it received: 'What is the difference between a crash form and a draw form?' To many toolmakers this may seem like a simple question, however, to those new in the industry or without much experience, it is worth explaining in more detail A crash form means that a male punch and a female die are closed together without any springs, cushions or otherwise to hold the blank as the forming process takes place
This article was originally published on Manufacturingtalk on 11 Oct 2006 at 8.00am (UK)
Related stories
Innovative Forming Simulation Services
StampingSimulation.com has released four new innovative Service Options, providing sheet metal tooling manufacturers with better value access to forming simulation technology.
Multi stage forming simulations
Stamping simulation examines multi stage forming simulations and how they can help.
The punch and die simply 'crash' together.
The method is successful on simple, shallow parts with basic shapes.
Basically, the flow of material cannot be controlled in this method and that is why wrinkling results in deep parts.
Further reading
Comparing incremental and one step simulation
It is important to understand the difference between the two ncremental and one step simulation calculation methods and to understand when it is appropriate to use each sheet metal forming method.
Sheet metal formability checked on-line
A sheet metal forming specialist Web site is offering a Formability Check promotion from users' uploaded CAD models and gives back a free incremental simulation report.
Parts can be 'crashed' from a square blank and then trimmed or a blank can be trimmed first and then crashed.
The latter is the cheapest tooling method.
A draw form is usually designed to control the stretch of the material to prevent wrinkles and stretch the material evenly.
This is done by a blank holder or binder.
The binder is often a flat surface that is mounted on high force gas springs.
Usually, it surrounds the punch.
This means as the die closes, the blank is held around the edges very tightly first, then stretched over the punch.
The flow of material can be controlled by the binder shape, the blank holding force and the placement of draw beads (to further stop material flowing, as might be required to stop wrinkles).
This almost always means that the blank is square and larger than that required in a crash form.
Furthermore, the drawn panel almost always needs to be trimmed after drawing and possibly formed again into the final shape.
Because of the cost implications, whenever possible, toolmakers and sheet metal stampers like to use a crash form.
However, it is often difficult to know if a crash form process will produce a panel free from wrinkles and splits.
With forming simulation, a crash form simulation result will quickly tell you whether or not a crash form process is feasible for your part.
This is the most common request for forming simulation the Web site receives.
StampingSimulation.com will leave you with the words of one of its customers who asked it to simulate a crash form on his part and discovered that a draw process was instead required: 'I am convinced you saved my customer thousands of dollars.
Thanks again'.
StampingSimulation.com is enabling small to medium sized businesses by providing access to the tools they need to win new work and remain suppliers to the large multi-nationals.
Forming simulation technology in small and medium business is still in its infancy, but with services such as those provided by StampingSimulation.com, it is now in the reach of even the smallest company.
• StampingSimulation.com: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
