Product category:
Metals and materials, stockholding
News Release from: SSAB Tunnplat | Subject: Aluzink AZ 185 coated sheet steel
Edited by the Manufacturingtalk Editorial
Team on 10 February 2003
Al-Zn-Si coated steel keeps rust at bay
Excellent corrosion protection and forming properties are claimed for a combination aluminium-zinc-silicon coated steel that meets corrosivity class C4 requirements.
Excellent corrosion protection and forming properties Aluzink AZ 185 from SSAB Swedish Steel is the only design steel in Europe to meet requirements for corrosivity class C4
This article was originally published on Manufacturingtalk on 26 Feb 2002 at 8.00am (UK)
Related stories
Profit doubled after material change
Simpler manufacture with a time saving of up to 50% and more durable products which are also 20% lighter -these are some of the benefits achieved by changing to a high strength steel.
Report underlines chief factors in steel purchase
A steel's technical properties are by far the most important factor when determining the choice of supplier, as well as expertise, speedy deliveries, customised volumes and formats, says a report.
This means that Swedish climate equipment manufacturer PM Luft has chosen to manufacture its products - which are exposed to severe corrosion - in Aluzink.
SSAB Swedish Steel has developed the material as coated steel sheet for designs used in severely corrosive environments.
The coating, a combination of aluminium, zinc and silicon, provides very good protection against corrosion and, in many cases, can replace aluminium and stainless steel.
Further reading
High strength research vessel extends frontiers
Low weight, high strength and outstanding seagoing qualities are among the reasons for using high strength steels instead of fibre glass for boat construction.
High strength steel helps skiers take flight
MultiCat - a new multifunction tool for piste preparation machines and snow vehicles in Alpine environments - is made of high strength steel and was a candidate for the Swedish Steel Prize.
Korean company wins Swedish Steel Prize 2002
Jindo Corporation of Korea was on November 21 named as the winner of the 2002 Swedish Steel Prize for its 53-foot container in extra high strength steel.
"We have succeeded in retaining the steel's superb forming properties and reasonable cost level, while the anti-corrosion properties are in the same corrosivity class as aluminium," comments Henrik Eriksson, marketing director for Aluzink at SSAB Swedish Steel.
"We can offer the material in a number of strength categories, which means that a high strength variant of Aluzink is also available." The climate equipment is often exposed to extreme humidity.
Highly corrosion-resistant material is therefore required.
"Air can contain a lot of moisture that often condenses in our products, which consequently need to meet exacting anti-corrosion requirements," says Conny Nilsson, head of market support at PM Luft AB.
"Manufacturing costs cannot be too high if we are going to sell our products on the global market.
Aluzink has proven to be the best material for us.
It's got the edge on aluminium when it comes to our product designs, in addition to which it gives a superb surface finish throughout the manufacturing process.
Aluzink is therefore our material of choice for those product parts which are exposed to corrosion.
The demand for climate treatment is growing everywhere.
The right kind of air regulation at the right temperature, moisture level and air turnover are decisive as regards comfort in the workplace, public indoor environments and shops.
Moreover, industry requires increasingly accurate air flow control in the production environment, concurrent with exacting demands in the form of growing eco-awareness and low long-term life cycle costs.
"The demand for a good indoor climate with a high level of hygiene is constantly growing," Mr Nilsson explains.
"Climate equipment which sustains rust damage is difficult to keep clean and soon becomes unusable.
If these kinds of products are properly serviced - and if they are made of the right material - they can be operated continuously, year after year, without rusting." Aluzink is divided into different classes, depending on the thickness of the coating.
Aluzink 185, which has a 25 micrometre coating on each side of the steel sheet, is the most resilient.
This thickness means that it meets the exacting requirements for corrosivity class C4 in conformity with European standards.
The material has a very long lifespan in normal environments and, moreover, is a good choice for industrial environments, polluted city environments and coastal areas.
When shearing, the sheared edges are protected against corrosion since the surface contains zinc.
• SSAB Tunnplat: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
