Product category:
Manufacturing IT hardware
News Release from: Scaime | Subject: ENod
Edited by the Manufacturingtalk Editorial
Team on 25 June 2007
Intelligent digital systems with eNod
Digital transmitter offers powerful, low-cost conversion any strain gauge sensor into an intelligent digital system
Scaime of France, a manufacturer of weighing components and solutions, has launched eNod - a new digital transmitter that offers a powerful, low-cost way to convert any strain gauge sensor into an intelligent digital system This new transmitter makes it possible to measure force, torque and pressure
This article was originally published on Manufacturingtalk on 14 Jun 2006 at 8.00am (UK)
Related stories
SS load cell suits industrial/commercial scales
Weighing components maker has introduced a new type of load cell, a stainless steel welded seal shear beam type, designed to fit with industrial applications and legal trade scales.
Monitor a range of sensors through a web-browser
An Ethernet based sensor communications device is a simple, inexpensive way to monitor a wide range of sensors using a web-browser over an Intranet or the internet.
Serial converters overcome distance barrier
You're stuck with two serial ports over 15 metres apart! You need to communicate - well now you can.
eNod integrates three advanced operating modes, allowing control of both static and dynamic processes.
eNod is a high-speed, highly accurate measuring transmitter, built using the latest generation of A/D convertors.
The transmitter offers a 1,200 measurement/second transmission rate, with a maximum resolution of one million divisions.
eNod is also a weighing controller, and integrates intelligent functions such as check-weighing, sorting and filling.
The device carries out measurement acquisition at very high speed and automatically calculates the weight value, which can then be directly integrated by the PLC.
eNod can be used to monitor manufacturing processes.
It allows the acquisition of values that are directly usable by any automated system (instantaneous measurement or peak values).
eNod includes RS232, RS485 and CANbus outputs, supporting MODBUS-RTU, SCMBUS and CANOpen protocols.
Each module has two logical inputs and outputs, allowing synchronisation with a PLC and alarm management.
To make eNod easier to install, Scaime also offers eNodView, a PC freeware for the set-up and calibration of the device, measurement acquisition and digital filtering simulation.
• Scaime: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
