Product category:
Drives, motors and power transmission, couplings, clutches
News Release from: Stober Drives | Subject: Posidynt SDS 4000 servo converter
Edited by the Manufacturingtalk Editorial
Team on 19 December 2002
Servo converter series software is
compatible
Servo converter series software is fully compatible with exisiting vector controlled frequency inverters for drives at reasonable cost and for high dynamic drives.
The introduction of the new Posidynt SDS 4000 servo converter series extends the Stober range of drive converters The software for the new Posidynt SDS 4000 servo converter series is fully compatible with the vector controlled frequency inverters of the Stober Posidrivet FDS 4000 series
This article was originally published on Manufacturingtalk on 25 Dec 2002 at 8.00am (UK)
Related stories
Low-backlash planetary gears offer longer life
Low-backlash planetary gears with higher torsional stiffness and stability offer a longer operational life for the output shaft bearings.
Both product families are equipped with a number of outstanding features.
Whereas the Posidrivet FDS 4000 frequency inverters offer solutions for dynamic drive problems at reasonable cost, the Posidynt SDS 4000 servo converter series are available for highly dynamic drive requirements.
The project planning and installation of large-scale systems is simplified greatly by the common software interface of the two product families.
The user commands for the servo converters and frequency inverters are the same and laid out in an easy to use way.
This means that with a field bus request it makes no difference whether Posidynt SDS 4000 or a Posidrivet FDS 4000 is addressed since both addresses have the same para-meters.
The device software from both product families includes the following high performance functions: * Rotary axis positioning without rounding off.
* Error-free electronic gearbox.
* Winder applications.
* and further technological functions.
• Stober Drives: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
