Product category:
Electrical and Electronic Testing
News Release from: SensorsOne | Subject: Keller LEO 2 digital pressure test gauge
Edited by the Manufacturingtalk Editorial
Team on 29 June 2006
Digital pressure test gauge acts as
comparator
Sensorsone is adding the Keller LEO 2 digital pressure test gauge to the buy online pages of the companies dedicated pressure measurement website.
Sensorsone is adding the Keller LEO 2 digital pressure test gauge to the buy online pages of the companies dedicated pressure measurement website This handy alternative to traditional analogue dial pressure gauges can be permanently fitted as a local pressure indicator or can be carried around and used as a master test gauge comparator
This article was originally published on Manufacturingtalk on 29 May 2006 at 8.00am (UK)
Related stories
Automatic zero for pressure transmitters
Sensorsone is launching the new digital autozero and span option for the Gefran TK Industrial Pressure Transmitter and the TPSA Precision Pressure Transmitter.
Low differential pressure transducer, transmitter
Sensorsone is adding the Ashdown Control DRS Low Differential Pressure Transducer and Transmitter for use with Wet and Dirty Gases to its pressure sensor range.
When mounted on top of a pneumatic or hydraulic hand pump the LEO 2 instantly becomes a portable pressure calibrator.
The LEO 2 Digital Manometer is battery powered and has a life of 1000 hours in continuous use.
The pressure gauge is mounted via a novel swivel jointed pressure connection to allow re-orientation of the gauge during use.
The 41/2 digit LCD display can show the live pressure reading plus the stored maximum or minimum value simultaneously.
The LEO 2 has a simple to use zero tare operation to optimise instrument accuracy and facilitates switching between absolute and gauge reference readings.
This allows the user to cut down on the number of test gauges they have to carry around as part of their test kit.
For hazardous areas there is an optional ATEX approved intrinsically safe version which has identical functions, ranges and accuracy as the non-IS version.
The LEO 2 is available in four ranges -1 to 3 bar, -1 to 30 bar, 300 bar and 700 bar, and all are accurate to +/-0.1% Full Scale, which is sufficient for testing most pressure gauges and pressure sensors.
The LEO 2 is protected by a compact, robust and lightweight IP65 rated case which completes a package which optimises both affordability and accuracy for a range of pressure measurement tasks.
• SensorsOne: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
