Product category:
Weld preparation equipment
News Release from: Surtech Surface Technology Products | Subject: Model 75-2000/CGX abrasive belt grinder
Edited by the Manufacturingtalk Editorial
Team on 02 March 2004
Abrasive belt grinder used in limited
space
Designed for metal fabricators with limited space a triple purpose abrasive belt grinder is used for grinding, deburring and chamfering and is fitted with a centreless unit.
Designed for metal fabricators with limited space a triple purpose abrasive belt grinder offers used for grinding, deburring and chamfering and is fitted with a centreless unit Model 75-2000/CGX is a triple purpose abrasive belt grinder designed for metal fabricators with limited space
This article was originally published on Manufacturingtalk on 1 Mar 2004 at 8.00am (UK)
Related stories
Centreless finishing machine offers versatility
Offering a high degree of versatility with different feed wheel angle settings, centreless finishing machine is designed for a cylindrical parts including tubes, pipes, pins and shafts.
Abrasive machine automatically radiuses corners
Abrasive belt machine will automatically radius corners corners on metal enclosures in seconds, as the abrasive belt head will pivot around the corner automatically.
It consists of a 4.1HP abrasive belt head with contact wheel at the front end, a top platen, plus a permanently fitted centreless unit at the rear end of the machine.
The contact wheel is used for general grinding and deburring, the top platen for linishing and chamfering and the centreless unit for grinding and polishing of tubes from approx.
25mm to 100mm diameter.
The abrasive belt size is 75mm x 2000mm and the contact wheel 200 mm dia x 75 mm wide.
The front contact wheel work station has a support table which facilitates grinding of short parts but which can also be removed for grinding longer parts.
The top flatbed platen is 540 mm long and 75mm wide.
It can be used for grinding, deburring and chamfering.
The permanently fitted centreless unit is designed for manual operation and for intermittent use.
Tubes up to approx.
1000mm long can be fed manually into the machine, longer tubes require a suitable conveyor system.
A built in dust extractor rounds off the compact machine package.
For small to medium amounts of non-hazardous dust the extractor exhausts through a fabric filter bag, for larger amounts of dust and dust with hot sparks an optional metal cyclone is available.
Model 75-2000/CGX is one of over 50 abrasive belt grinding, deburring and polishing machines availablle from Surtech.
Most machines can be viewed and tested in Surtech's Abrasive Test Centre.
• Surtech Surface Technology Products: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
