Product category:
Cans, canning and tins materials, equipment and services
News Release from: Sencon (UK) | Subject: SI9100 Semi-Automatic Enamel Rater
Edited by the Manufacturingtalk Editorial
Team on 20 June 2002
The new end adaptor for rectangular ends
Sencon has added to its range of adaptors for the industry leader, its SI9100 Enamel Rater.
allows the user to check lacquer integrity on most types of food and beverage end Now with additional simple change parts, rectangular ends such as Club, Oblong, Oval, Hansa and Dingley can be checked in a simple three-step operation
This article was originally published on Manufacturingtalk on 17 Nov 2005 at 8.00am (UK)
Related stories
Detector Solves Can Makers' Uncoated Sheet Problem
Sencon's new Lacquer Presence Detector, designated SC640, is a single head, non-contact M30 barrel sensor that is said to distinguish between coated and uncoated metal at line speed.
Can manufacturing cost savings
Most of the material cost savings effort in the can manufacturing process goes into metal savings.
1.
Place the end on the adaptor 2.
Press down the contact lever, then 3.
Rotate the adaptor in its cradle.
Other shapes and sizes are available on application.
Now, whatever the shape of the ends you manufacture, all the advantages of the recently launched SI9100 Semi-Automatic Enamel Rater are available to you.
With an easy to use operator interface, soft touch keys, large display, multi-language support and recessed connectors in an IP65 rated corrosion and waterproof case, the SI9100 provides the industry standard conductivity test for cans and ends.
During the simple test procedure, the SI9100 checks: continuously for good contact that there is sufficient electrolyte in the adaptor that the end has been changed between tests then it automatically: starts the test sends the results to a network or computer displays the batch result.
All the errors that could be caused by a repetitive routine are eliminated.
No ends are wrongly passed because of bad contact or lack of electrolyte.
No areas are missed through insufficient electrolyte.
The operator doesn't have to remember to press any buttons or record each reading.
He just has to concentrate on completing the simple routine for each end in the batch as efficiently as possible.
If you already have an SI9100, then this plug and play adaptor is a simple addition to extend your test range.
• Sencon (UK): contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
