Product category:
Turning tools
News Release from: TaeguTec UK | Subject: 'T' type tool holder
Edited by the Manufacturingtalk Editorial
Team on 18 February 2004
Exceptionally strong holder allows
bigger feeds
Providing exceptionally strong clamping force, a turning toolholder is ideal for high feed machining enabling feeds to be increased greatly when conducting continuous or interrupted cutting.
Specialist tooling manufacturer TaeguTec, will introduce its new 'T' type tool holder on stand number 4569 at the MACH exhibition in April The new 'T' type holder has an exceptionally strong clamping force, making it ideal for high feed machining solutions
This article was originally published on Manufacturingtalk on 12 Mar 2002 at 8.00am (UK)
Related stories
Lower price ceramic inserts are pressed to size
What is believed to be a ground-breaking new product - 'As Pressed' ready-sized ceramic inserts - will be launched at MACH 2002. The inserts are some 20% lower in cost and life increased by 30%.
Tests with the new holder show that it is capable of interrupted cutting of materials with an hardness up to 240HB with a 2mm depth of cut at a feed rate of up to 110m/min.
A number of turning tests have demonstrated that the clamping power of the 'T' type holder is significantly stronger than that of a lever lock holder, enabling feeds to be increased greatly when conducting continuous or interrupted cutting.
The high clamping force of the tool will significantly increase tool life and improve productivity.
The new 'T' type holder is a huge improvement upon the lever lock type holder and customers will see considerable benefits in productivity.
MACH 2004 - April 19-23 - NEC Birmingham, UK.
Stand 4569.
• TaeguTec UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
