Product category:
Milling cutters
News Release from: TaeguTec UK | Subject: Bull Mill ultra high feed milling cutter
Edited by the Manufacturingtalk Editorial
Team on 16 March 2004
Mould and die mill machines at high
feedrates
Ultra high feed milling cutter for mould and die work has a double curve cutting edge design that permits feed rates up to 4.5mm/tooth with 2mm depth of cut, on most mould and die materials.
On stand 4569 at MACH, TaeguTec will exhibit its new Bull Mill ultra high feed milling cutter for the first time in the UK The cutter has been specifically designed for the Mould and Die industry and is destined to take the machining of mould and die related products into a new era
This article was originally published on Manufacturingtalk on 12 Mar 2002 at 8.00am (UK)
Related stories
Lower price ceramic inserts are pressed to size
What is believed to be a ground-breaking new product - 'As Pressed' ready-sized ceramic inserts - will be launched at MACH 2002. The inserts are some 20% lower in cost and life increased by 30%.
Pressed ceramic inserts up cutting performance
To be launched at MACH 2002 is a product that will revolutionise the metal cutting industry's use of ceramic inserts for turning and grooving, dramati- cally improving tool-life and cutting speeds.
The unique double curve cutting edge design permits feed rates up to 4.5mm/tooth with 2mm depth of cut, on most mould and die materials and applications.
The Bull Mill will dramatically reduce cycle times, cost per part production and improve metal removal rates.
The Bull Mill can increase productivity by 200% compared to conventional button cutters.
Many milling tools used in the mould and die industry suffer premature failure caused by their inability to stand up to the rigours of the application.
The Bull Cutter prevents this with its large chip gullet, which improves cutter strength and product durability.
The unique dovetailed insert pocket provides strong, accurate, location of the insert, allowing it to be clamped with a single screw.
The design overcomes the need for additional top or wedge clamps providing increased cutter strength and chip evacuation.
The innovative insert design provides constant cutting forces even on extended machining of die cavities.
This prevents vibration and permits the Bull Cutter to be used in the most extreme applications.
MACH 2004 - April 19-23 - NEC Birmingham, UK.
Stand 4569.
• TaeguTec UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
