Product category:
Milling cutters
News Release from: TaeguTec UK | Subject: Solid carbide roughing end mills
Edited by the Manufacturingtalk Editorial
Team on 22 September 2004
Carbide roughing end mills have 45deg
wave helix
Ideal for cutting steel, cast iron, stainless steel, exotic alloys, graphite and materials with a hardness up to 470HB, a range of 45 degree wave helix roughing end mills come in three lengths.
TaeguTec of Wetherby, Leeds, has recently launched its new solid carbide range of roughing end mills The new 45 degree wave helix range is available in short, medium and long length series and is ideal for cutting steel, cast iron, stainless steel, exotic alloys, graphite and materials with a hardness up to 470HB
This article was originally published on Manufacturingtalk on 12 Mar 2002 at 8.00am (UK)
Related stories
Lower price ceramic inserts are pressed to size
What is believed to be a ground-breaking new product - 'As Pressed' ready-sized ceramic inserts - will be launched at MACH 2002. The inserts are some 20% lower in cost and life increased by 30%.
The short series is available from 6-20mm diameter with a cutting length of 7-26mm and an overall length of 54-92mm.
Up to 12mm diameter the cutters are four flute with the 16mm and 20mm diameters being five and six flute respectively.
The medium length series consists a range of diameters from 6-25mm with a cutting length of 16-45mm.
Like the short series, the medium cutters are available as four, five and six flute cutters with an overall length from 57-121mm.
The long series of end mills from TaeguTec is available in the same diameters as the short series.
A majority of the shank on the long range has been necked back to enable cuts from 20-59mm depth, whilst the overall length runs from 57 to 100mm.
This new range is well suited to general machining applications within the workshop where extended tool life and maximum material removal is required.
• TaeguTec UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
