Latest news on Manufacturingtalk categorised by supplier
Toshiba Tungaloy Europa
Address:
Elisabeth-Selbert-Str. 3
Langenfeld
D-40764 Langenfeld
Germany
Telephone: (Germany) +49 2173 904 200
http://www.tungaloy.de
Our RSS feed for news from Toshiba Tungaloy Europa
Request to receive our free email newsletter each week
Listing of all 14 news releases from Toshiba Tungaloy Europa:
Lower cost bar has sandwich carbide structure
The T-Bar, developed by Toshiba Tungaloy, is a carbide-reinforced anti-vibration boring bar (L/D>6) and threading toolholder for the machining of deep holes.
News from Toshiba Tungaloy Europa (20 November 2001)
Attention to geometry improves small parts turning
To meet the needs for machining small components, Toshiba Tungaloy has designed special chipbreaker geometries in its J-Series cutting tools for smaller CNC lathes.
News from Toshiba Tungaloy Europa (20 November 2001)
Hard machining performed with interrupted cuts
The BX380 cutting tool material contains 75% CBN with a ceramic binder for hard machining with heavy interrupted cuts.
News from Toshiba Tungaloy Europa (20 November 2001)
Boring is vibration-free in stainless steels
Toshiba Tungaloy's -DS Chipbreaker insert for the boring of stainless steels and low alloy steels offers easy chip flow and anti-vibration boring.
News from Toshiba Tungaloy Europa (20 November 2001)
Inserts allow hard turning of complex components
Complex workpieces, of 50-62 HRC, can be hard turned with varying depths of cut using the Toshiba Tungaloy LX11 extremely wear resistant ceramic grade.
News from Toshiba Tungaloy Europa (20 November 2001)
Multi-function milling cutters are versatile
The multifunctional tool systems E/TAD12, 45deg face milling cutter and E/TPD12, 90deg square shoulder milling cutter, are available in seven different cutting materials for a variety of uses.
News from Toshiba Tungaloy Europa (20 November 2001)
Inserts offer high performance cast iron turning
Due to the extremely stable clamping, the newly designed dimple FX105 insert achieves rough turning of grey cast iron and nodular grey cast iron at 600 - 900m/min cutting speeds.
News from Toshiba Tungaloy Europa (20 November 2001)
Inserts provide excellent surface finish in steels
The Toshiba Tungaloy ASW Wiper inserts give excellent surface qualities for medium duty operations in steels and alloyed steels at high feed rates.
News from Toshiba Tungaloy Europa (19 November 2001)
Plunge Cutter has a centre cutting edge
The EVX Plunge Cutter, with centre cutting edge, is a multifuntional endmill for plunge cutting, shoulder milling and grooving.
News from Toshiba Tungaloy Europa (19 November 2001)
Plunge cutter avoids vibrations in tool steels
The TZP plunge-milling cutter is intended for Z-feed roughing operations in mould and die work. The machining of deep dies is often very difficult.
News from Toshiba Tungaloy Europa (19 November 2001)
Plunge milling accomplished without chatter
Toshiba Tungaloy has developed a milling cutter for Z-feed finishing operations without chatter and cutter deformation when machining high precision surfaces and guides in moulds and dies.
News from Toshiba Tungaloy Europa (19 November 2001)
Face milling cutter operates at high feedrates
The high-performance TXP HPC face milling cutter performs face milling feedrates exceeding 2mm per tooth and reduces machining times by one half.
News from Toshiba Tungaloy Europa (19 November 2001)
Chipbreaker inserts improve SS machining
New insert geometry has been designed by Toshiba Tungaloy for turning of stainless steel and avoids quick notch wear and reduces cutting force.
News from Toshiba Tungaloy Europa (19 November 2001)
Sintering process produces tougher carbide grades
Revolutionary new carbide grade, for machining cast irons and common steels, has been produced by Toshiba Tungalloy using a new sintering process which improves the carbide toughness.
News from Toshiba Tungaloy Europa (19 November 2001)
