Product category:
Milling cutters
News Release from: Toshiba Tungaloy Europa | Subject: EVX Plunge Cutter with centre cutting edge
Edited by the Manufacturingtalk Editorial
Team on 19 November 2001
Plunge Cutter has a centre cutting edge
The EVX Plunge Cutter, with centre cutting edge, is a multifuntional endmill for plunge cutting, shoulder milling and grooving.
The EVX Plunge Cutter, with centre cutting edge, is a multifuntional endmill for plunge cutting, shoulder milling and grooving The machining of deep dies in the mould and die Industry is often very difficult
This article was originally published on Manufacturingtalk on 19 Nov 2001 at 8.00am (UK)
Related stories
Inserts provide excellent surface finish in steels
The Toshiba Tungaloy ASW Wiper inserts give excellent surface qualities for medium duty operations in steels and alloyed steels at high feed rates.
When applying relatively slim tools, vibrations often occur which have a negative impact on the machining result.
This low process reliability asked for new milling strategies and tool concepts.
The new EVX-Plunge Cutter has a unique design with centre cutting edge and can be successfully used for shoulder milling, grooving and plunging operations.
This cutter, also suitable for drilling and hole enlarging.
It enables machining on tool Z-level giving ideal load on the machine and thus protecting the spindle.
A maximum process reliability and anti-vibration machining is achieved.
Especially the double clamping of the insert and the increased clamp torque by means of TORX-Plus screw round off the broad range of application of this innovative tool system.
Sintered inserts in grade AH120 with chipbreaker reduce cutting forces and thus obtain excellent surface qualities.
• Toshiba Tungaloy Europa: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
