Product category:
Turning tools
News Release from: Toshiba Tungaloy Europa | Subject: BX380 CBN tooling
Edited by the Manufacturingtalk Editorial
Team on 20 November 2001
Hard machining performed with
interrupted cuts
The BX380 cutting tool material contains 75% CBN with a ceramic binder for hard machining with heavy interrupted cuts.
The BX380 cutting tool material contains 75% CBN with a ceramic binder for hard machining with heavy interrupted cuts Due to continuously increasing requirements, modern hard machining with PCBN (polycrystalline cubic boron nitride) asks for more specific cutting materials based on CBN
This article was originally published on Manufacturingtalk on 19 Nov 2001 at 8.00am (UK)
Related stories
Inserts provide excellent surface finish in steels
The Toshiba Tungaloy ASW Wiper inserts give excellent surface qualities for medium duty operations in steels and alloyed steels at high feed rates.
To answer the growing market demands, Toshiba Tungaloy increased its already existing and well-established product range of CBN cutting materials BX310, BX330 and BX360 with the new grade BX380.
The CBN-content of this high performance cutting material determines wear-resistance and application field of the respective grade.
Due to the relatively high content of CBN of 75% with ceramic binder material, the most important advantages of BX380 are realised in hard machining at extremely interrupted cut or unstable machining conditions as e.g high or altering cutting depths (VC 80-160 m/min.).
The newly established, well balanced variety of grades guarantee maximum performance and economic machining in various areas of application.
• Toshiba Tungaloy Europa: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
